Search Results for: 21

Clarke Tech C-Tech SFP2010

/tmp/con-5cb270f564897/2780_Product.jpg

Digital Satellite Meter with function of spectrumanalyzer and electronic
compass. The meter C-Tech SFP2010 helps you reliably and efficiently with the
correct alignment, commissioning and maintenance of satellite dishes.
The
satellite meter is easy – easy to operate by the user.The reception quality is
displayed as a numerical reading and as a bar graph (bar graph). Additionally,
the image quality of FTA TV programs to be reviewed on the 8.9-inch TFT LCD
screen.
This Digital Satellite Signal Meter is simple and convenient for
setting and aligning a satellite dish. Using the parameters of satellite, you
can set and align a satellite dish quickly. SFP2010 is easily and accurately.
Aim your dish with no questions with the SFP-2010 and View the channel while
aiming the dish.


Technical data



  • 3.5 inch TFT LCD screen to display the measurements and FTA TV
    programs´

  • Automatic calibration on boot up

  • Visual indication and audible indicator of signal strengh (Level-dependent
    beep)

  • Software update via USB storage device

  • Built-in Li-ion battery (rechargeable)

  • Operation in battery mode > has a 4 hour use cycle.

  • Shows the signal strength in percent and as a bar graph (bar graph)

  • Indicator Lights for 13/18 volts, signal Lock,22 kHz

  • Spectrum Analyzer

  • Automatic calculation of the angle of azimuth and elevation

  • Frequency Range: 950 – 2150 MHz / (DVB-S) QPSK

  • DiSEqC control

  • Measurement of BER and C/N

  • Electronic compass

  • Blindscan

  • OSD in 8 languages

  • Dimensions: 95 x 155 x 60mm

  • Weight: 500g

Clarke-Tech Single LNB 0.3 dB


  • N/F : 0.3 dB

  • Frequency Range : 10,7 – 12,75 GHz

  • L.O. Frequency : 9,75 / 10,6 GHz

  • Output freguency: 950 ~ 2150 MHz

  • 40 mm Feed

  • Selected Quality 0.2

Dreambox DM8000 S HD

/tmp/con-5cb2704c8371f/2454_Product.jpg
  • 400 MHz MIPS Processor
  • Linux Operating System
  • brilliant big-size OLED – Display
  • MPEG-2 /H.264 Hardware decoding
  • TWIN DVB-S2 tuner
  • 2 x Plug&Play tuner sockets optional for DVB-S, DVB-C or DVB-T
  • 4 x DVB Common-Interface Slot
  • 2 x Smartcard-Reader
  • V.24/RS232 Interface
  • Integrated Compact Flash and SD Card Slot
  • 10/100 MBit compatible Ethernet Interface
  • 3 x USB 2.0 (1 x front, 2 x back)
  • S/PDIF Interface for digital bit stream out (AC-3)
  • 2 x Scart-interfaces
  • S-Video
  • YPrPb (Component)
  • DVI
  • Audio/Video cinch out
  • 128 MByte Flash, 256 MByte RAM
  • 2 x integrated SATA
    – support for internal HDD 3,5″ in any capacity
    – support for SATA SlimLine DVD
  • embedded WiFi (Mini-PCI device inl. antenna)
  • unlimited channel lists for TV/Radio
  • channel-change time < 1 second
  • automatic service scan
  • directly bouquet-lists
  • EPG (electronic program guide)
  • Videotext Decoder
  • multiple LNB-Switching control (DiSEqC)
  • OSD in many languages and skin-support

DreamBox DM8000 technical data

DBS-Tuner:
Frequency Range 950…2150 MHz
QPSK Demodulation EN 302 307
Signal Level – 65 dBm…- 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35 %
Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V

Video decoder:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, coaxial (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

VCR-Scart:
FBAS

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

USB:
USB 2.0 connector (3x)

SATA Interface:
for internal HDD
Compact Flash – Reader
SD Card – Reader

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB power off in Standy mode
Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:
< 30W (in operation, horizontal polarization / 400mA LNB current)
< 25W (in operation, no LNB)
< 2W (Deep-Standby-Mode)

Input voltage:
230V / 50 Hz alternating current +/- 15%
110V / 60 Hz alternating current +/- 15%

Physical specification:
Ambient Temperature +15°C…+35°C
Humidity < 80%
Size (W x D x H): 430 mm x 280 mm x 90 mm

Smart DigiMeter

/tmp/con-5cb270ecb8c99/2790_Product.png

The Smart DigiMeter is a handy digital satellite
meter for setting and aligning a satellite dish quickly and easily. If a signal
is locked, you hear a tone alert and see an indicator light. The quality of
reception will be displayed numerical and as a bargraph. Additionally the video
quality can be checked with the 3.5 inch high definition TFT LCD screen.
Included in delivery is a power supply, all required connection cables and a
suitable bag.


Technical Data 1



  • Input frequency: 950 – 2150 MHz
  • Tone alert and indicator light at signal lock
  • Display of signal strength numerical and as a bargraph
  • Measuring of MER and FEC
  • 3.5 inch high definition TFT LCD screen to show TV programs
  • Support network searching
  • Auto calculation of azimuth, elevation and polarization
  • Software upgrade by PC
  • Rechargeable LI-ION battery (Fast charging)
  • Operating time approx. 4 hours
  • Dimensions: 95 x 155 x 60 mm

1 The specifications are subject to change without notice.

Satlook digital NIT

/tmp/con-5cb270f4069bc/2791_Product.jpg

The Satlook Digital is a Swedish made Sat-TV Instrument and
Spectrum-Analyzer. The unit is made for exact alignment and adjustment of
Satellite Dishes. It is intended for professional use when high accuracy and
precise information are needed.


 


It’s easily operated without a lot of unnecessary buttons and
knobs. The basic functions are easy to get a hold on and takes only minutes to
learn. This instrument is provided with a 4.5″ B/W-monitor which either shows
normal Sat-TV channel, the frequency spectrum 920-2150 MHz (or parts thereof)
alt. Digital data. Menus/help-displays are shown on the LCD-screen (64×128)
beside the monitor.

Analog Sat-TV channels can be tuned in and viewed
upon (Multistandard Video PAL, NTSC and SECAM). Audio frequencies between
5.5-8.5 MHz can be listened to. The Spectrum can be extended (zoom in) for
correct adjustment for the polarization (“cross-polarization”). The instrument
has very high resolution and accuracy. It presents measured data _+2 dB (at
around 20 C.)

SATLOOK Digital presents, under one of the sub menus.
digital information like BER (bit error rate), constellation diagram (QPSK) and
S/N (Signal/Noise Ratio). Satlook Digital can be handle a lot of
memory-positions and both spectrum-pictures and certain frequencies can be saved
(both analog and digital transponders).

The polarization of the LNB is
switchable 13V/18V and Hi-Lo Band with 22 KHz-tone. The DISEQC-function controls
all DISEQC-accessories (like switches, LNB’s and actuators). The power of the
instrument is supplies by a built in and rechargeable battery. Even though the
instrument has lot of functions it is still very light and
flexible.


Specifications:




  • Input Frequency:   920-2150MHz (easily reduced to
    250MHz max zoom in)



  • Frequency Display: L.O. can be setup. Yes, IF default. All
    standard LNB



  • Min. Level in:        
    About 35 dBuV (noise).



  • Max Level in:        
    About 90 dBuV.



  • Attenuation:         
    15 dB attenuator on/off.



  • Display of signal level: (analogue) dB on LCD/monitor.
    Pitch-tone.



  • Display of signal level: (Digital) S/N (signal/noise-ratio) BER
    (bit error rate) Constellation (QPSK)



  • TV/Audio standard: Multi TV/Audio (PAL, NTSC, SECAM).



  • KU- C-band: Yes, selectable.



  • Audio bandwidth :    Adjustable between 5.5 MHz
    and 8.5 MHz



  • Input impedance:    75 Ohm, BNC-con.



  • Picture-screen:       4.5″-monitor,
    B/W



  • Menus:                 
    On LCD 64×128.



  • Memory:               
    100 spectrum pictures can be stored with name. Stored spectrum can be mixed
    for easy identification of satellite.-“Max hold” function.



  • Favorite channels: Both analogue and digital frequencies can be
    stored (with name). Simultaneous measuring of up to 10 channels at the same
    time. Each channel with individual setup of 13/18v and 22 kHz on/off.



  • PC-connection: Yes, RS232-output



  • Power out: Yes, 13-18V



  • 22 kHz tone: Yes, on/off.



  • DiSEqC: Yes, all 1.0 and 1.1. Also Tone burst on/off.



  • DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and
    SatSelect.



  • Battery: Rechargeable 12V, 3.5 amp/hour.



  • Operational: About 1 hour on a fully charged battery.



  • Weight: About 5 kg (11 lbs)  including battery.



  • Accessories: Nylon carrying-case.



  • Power-supply: 100-240V/50/60Hz   13.5V,1.7
    Amp.



  • Car-charger.



  • BNC/F-adapter

Satlook Digital NIT Color

/tmp/con-5cb270f4069bc/2792_Product.jpg

The SATLOOK NIT COLOR is a swedish made SAT-TV instrument and
spectrum-analyzer.The unit is made for exact alignment and adjustment of
satellite-dishes. It is intended for professional use when high accuracy and
precise information are needed.


It´s easily operated without a lot of unnecessary buttons and knobs. The
basic functions are easy to get a hold on and takes only minutes to learn. The
instrument is provided with a 5″ 16:9 LCD-monitor which either shows “Free to
air” SAT-TV-channel (Digital or Analog), the frequency spectrum 920-2150 MHz (or
parts thereof) alt. Digital data. Menus/help-displays are shown on the LCDscreen
(64×128) beside the monitor.


“Free to air” Digital (DVB-S, QPSK) and Analog SAT-TV channels can be tuned
in and viewed upon (Multistandard Video PAL, NTSC and
SECAM).
Audiofrequencies between 5.5 – 8.5 MHz can be listened to.


The spectrum can be expanded (zoom in) for correct adjustment of the
polarisation (“cross-polarisation”).The instrument has very high resolution and
accuracy. It presents measured data ±2 dB (at around 20° C). SATLOOK NIT COLOR
presents, under one of the sub menus, digital information like BER (bit error
rate), constellationdiagram (QPSK) and S/N (signal/noise ratio).


SATLOOK NIT COLOR in the bitstream (NIT = Network Information Table). The NIT
also contains info about the transponders TV and Radio channels.


SATLOOK NIT COLOR can handle a lot of memory-positions and both
spectrum-pictures and certain frequencies can be saved (both analog and digital
transponders). The polarisation of the LNB is switchable 13V/18V and the Hi-Lo
band with 22 kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like
switches, LNB´s and actuators). The power of the instrument is supplied by a
built in and rechargeable Li-lon battery. Even though the instrument has a lot
of functions it is still very light and flexible.


Technical Specification:


Input frequency: 920-2150MHz, easily reduced to250 MHz (max zoom in).

Frequency display: Yes, IF default. All standard LNB L.O. can be
setup.
Min level in: About 35 dBμV (noise).
Max level in: About 90
dBμV.
Attenuation: 15 dB attenuator on/off.
Display of
signallevel:
(analog) dB on LCD-monitor. Pitch-tone.
Accuracy: ±2 dB (at
+20° C)
Display of signallevel: (Digtal) S/N (signal/noise-ratio) BER (bit
error rate) Constellation (QPSK)
Satellite-identification: Yes, by reading
out the NIT in the bitstream. Info about the TV and Radio channels.
TV/Audio
standard: Multi TV/Audio (PAL, NTSC, SECAM).
KU- C-band: Yes,
selectable.
Audio bandwidth : Adjustable between 5.5 and 8.5 MHz
Input
impedance: 75 Ohm, BNC-con.
Picture-screen: 5” 16:9 TFT-LCD monitor
Menus:
On LCD 64×128.
Memory: 100 spectrum pictures can be stored with name. Stored
spectrum can be mixed for easy identification of
satellite.-“Maxhold”-function.
PC-connection: Yes, RS232-output
Power out:
Yes, 13-18V.
22 kHz tone: Yes, on/off.
DiSEqC: Yes, all 1.0 and 1.1. Also
Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2,
SatScan and SatSelect.
Battery: Rechargable 12v, 3.5
amp/hour.
Operational: About 1 hour on a fully charged battery.
Weight:
About 3 kg incl.battery.

Satlook Mark IV FTA

/tmp/con-5cb270f4069bc/2793_Product.jpg

EMITOR SATLOOK Mark IV FTA is a measuringinstrument developed and
manufactured in Sweden for exact alignment and adjustment of
satellite-dishes.
The instrument is provided with a 4″ TFT-color monitor
which either shows Digital Free To Air, analog TV-channel or the frequency
spectrum 920-2150 MHz (normal or expanded mode).
Soundfrequencies between 5.5
8.5 MHz can be tuned in and listened to.
The polarisation of the LNB is
switchable with a 22 kHz tone and/or with 13V/18V. DiSEqC-accessories (like
switches) can also be controlled. Even DiSEqC-actuators (level 1.2) can be run
in the Digital FTA mode.
The instrument is protected from short-circuit when
connecting the LNB.
The main functions of the Digital Free To Air receiver
are controlled on the instrument´s key-pad but can also be fully controlled with
the attached remote-control. Power to the instrument is supplied by a built in,
rechargeable battery.
The battery is recharged from the external battery
charger or the car-adaptor.
Even though the instrument has a lot of functions
it is still very flexible and easy to use.
SATLOOK Mark IV FTA weights only
about 5,5kg incl. the battery and carrying-case.


 


Input frequency: 950-2150MHz.
Min level
in: About 30 dBuV (noise).
Max level in: About 100
dBuV.
TV/Audio standard: PAL.
Input
impedance: 75 Ohm, BNC-con.
Picture-screen: 4″
Color TFT monitor
KU- C-band: Yes,
selectable.
Audio bandwidth: Adjustable between 5.5 MHz and
8.5 MHz
Measuring method:


1. Full spectrum, normal or expanded mode.
2. 4” monitor with full
picture. Optional with pos/neg video.
3. Leavel check on single channel with
LED-bar display.
4. Level check with audio from loudspeaker.
5. FTA
Digital signal readout. Max leavel: Spectral with max peaks.


Two digits LED display with max value.
LED bar with max
indication.
Highest tone from loudspeaker.
FTA Digital max signal.


Supply voltage LNB: 13-18V, switchable
Tone
switch: 22 KHz. On / Off.
DiSEqC: Standard DiSEqC,
level 1.0.
Output: Video and Audio output for connection to
TV / monitor.
Operational: About 1 hour on a fully charged
battery.
Weight: Aprox. 5.5 kg
incl.battery.
Power supply: Internal rechargeable battery
12V 3.0 Amp. External power supply, In: 100-230V. Output 13.5V 1.5 amp DC.
Caradaptor.
Accessories: Nylon carrying-case.
Adaptor BNC
/ F-connector.
Remote control for FTA set-top box.

Invacom Flansch Universal Quad QDF-031

/tmp/con-5cb27089d4e4e/2767_Product.jpg

**discontinued product** 

Universal Quad LNB 0.3dB C120

A high performance universal LNB with 4 independent switched outputs, for dishes supplied with their own feed-horn.
Typically used with fixed dishes to supply 4 receivers, in areas where the signal strength is poor.

Some customers find that the Invacom Quad LNBs outperform the single and twin LNB in low signal areas.

Input Frequency: 10.7 ~ 12.75 GHz
Output Frequency: 950 ~ 2150 MHz
Noise Figure: 0.3 dB typical
Gain: 50 ~ 60dB
Interface: C120 flange, 18.5 Ø
Ideal Dish F/D: N/A

 

Invacom Flansch Quad Polar QPF-031

/tmp/con-5cb27089d4e4e/2768_Product.jpg

Quad Polar LNB (CP LP)
A 4 fully switched output CP/LP LNB with
simultaneous reception of Linear & Circular polarisations

 

Input Frequency
FSS BandBSS
Band

 11.7 – 12.2 GHz
& 12.2-12.7GHz12.2 – 12.7 GHz
Output Frequency
FSS Band
BSS
Band
 950 – 1450 MHz
950 – 1450 MHz
Noise Figure
0.3dB typical
Gain
50 – 60dB
Interface
18.5 mm Diameter Waveguide,
C120 Flange
Ideal dish F/D
 N/A

 

Sembox DSM 2009 Digital Satfinder MK II

/tmp/con-5cb270dd59a2b/2786_Product.jpg

The digital satellite finder Sembox DSM 2009, with an ultra-light weight of
less than one kg, is super easy to transport and thanks to a digital Sembox when
DSM 2009 neck strap attached to the roof is not an obstacle.
The Sembox DSM
2009 meter shows not only signal strength quality, but you still during an
installation first channel images on the TFT-LCD screen. Among other things, is
a signal to noise ratio in the digital satellite finder Sembox DSM 2009,
numerically and in bars, it also helps with acoustic signals when adjusting the
satellite antenna.
The satellite meter Sembox DSM 2009 can be easily – easily
programmed by the user. 13 V, 18 V, 22 kHz and signal-detection lights directly
under the TFT LCD screen, also an automatic calculation of position Horizontal /
Vertical.



  • Input Frequency 950~2150MHz
  • Input Impedance 75
  • Input Level -65~ -25dBm
  • USALS supported
  • BER, S/N, FEC Indication, angle Calculation
  • Sound Alarm & Light alarm when waek signal locked
  • Auto search, blind search, NIT search, manual search supported
  • Shortcut F1 to roof mode (bigger signal bar)
  • Mini size, 102mm x 34mm x 180mm
  • DiSEqC 1.0 DiSEqC 1.1 and DiSEqC 1.2, Auto DiSEqC Supported
  • Global satellite list & multi language Technical Facts DSM2009
  • Digital Satellite Meter with Digital Spectrum
  • Digital meter for signal strength (in numerical value and picture)
  • Outdoor menu mode for installation outside
  • 22K Indicated by light
  • 3.5 Inch high definition TFT LCD screen which can play channels
  • AV-IN (by RCA) fuction for testing STB, camera, etc.
  • LI-ION battery (2200mA), last 6 hours, fast change (2 to 3 hours)
  • analog and digital spectrum
  • RCU optional
  • RCA output for TV