The Satlook Digital is a Swedish made Sat-TV Instrument and
Spectrum-Analyzer. The unit is made for exact alignment and adjustment of
Satellite Dishes. It is intended for professional use when high accuracy and
precise information are needed.
It’s easily operated without a lot of unnecessary buttons and
knobs. The basic functions are easy to get a hold on and takes only minutes to
learn. This instrument is provided with a 4.5″ B/W-monitor which either shows
normal Sat-TV channel, the frequency spectrum 920-2150 MHz (or parts thereof)
alt. Digital data. Menus/help-displays are shown on the LCD-screen (64×128)
beside the monitor.
Analog Sat-TV channels can be tuned in and viewed
upon (Multistandard Video PAL, NTSC and SECAM). Audio frequencies between
5.5-8.5 MHz can be listened to. The Spectrum can be extended (zoom in) for
correct adjustment for the polarization (“cross-polarization”). The instrument
has very high resolution and accuracy. It presents measured data _+2 dB (at
around 20 C.)
SATLOOK Digital presents, under one of the sub menus.
digital information like BER (bit error rate), constellation diagram (QPSK) and
S/N (Signal/Noise Ratio). Satlook Digital can be handle a lot of
memory-positions and both spectrum-pictures and certain frequencies can be saved
(both analog and digital transponders).
The polarization of the LNB is
switchable 13V/18V and Hi-Lo Band with 22 KHz-tone. The DISEQC-function controls
all DISEQC-accessories (like switches, LNB’s and actuators). The power of the
instrument is supplies by a built in and rechargeable battery. Even though the
instrument has lot of functions it is still very light and
Input Frequency: 920-2150MHz (easily reduced to
250MHz max zoom in)
Frequency Display: L.O. can be setup. Yes, IF default. All
Min. Level in:
About 35 dBuV (noise).
Max Level in:
About 90 dBuV.
15 dB attenuator on/off.
Display of signal level: (analogue) dB on LCD/monitor.
Display of signal level: (Digital) S/N (signal/noise-ratio) BER
(bit error rate) Constellation (QPSK)
TV/Audio standard: Multi TV/Audio (PAL, NTSC, SECAM).
KU- C-band: Yes, selectable.
Audio bandwidth : Adjustable between 5.5 MHz
and 8.5 MHz
Input impedance: 75 Ohm, BNC-con.
On LCD 64×128.
100 spectrum pictures can be stored with name. Stored spectrum can be mixed
for easy identification of satellite.-“Max hold” function.
Favorite channels: Both analogue and digital frequencies can be
stored (with name). Simultaneous measuring of up to 10 channels at the same
time. Each channel with individual setup of 13/18v and 22 kHz on/off.
PC-connection: Yes, RS232-output
Power out: Yes, 13-18V
22 kHz tone: Yes, on/off.
DiSEqC: Yes, all 1.0 and 1.1. Also Tone burst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and
Battery: Rechargeable 12V, 3.5 amp/hour.
Operational: About 1 hour on a fully charged battery.
Weight: About 5 kg (11 lbs) including battery.
Accessories: Nylon carrying-case.
Power-supply: 100-240V/50/60Hz 13.5V,1.7