Search Results for: 13

Clarke Tech C-Tech SFP2010

/tmp/con-5cb270f564897/2780_Product.jpg

Digital Satellite Meter with function of spectrumanalyzer and electronic
compass. The meter C-Tech SFP2010 helps you reliably and efficiently with the
correct alignment, commissioning and maintenance of satellite dishes.
The
satellite meter is easy – easy to operate by the user.The reception quality is
displayed as a numerical reading and as a bar graph (bar graph). Additionally,
the image quality of FTA TV programs to be reviewed on the 8.9-inch TFT LCD
screen.
This Digital Satellite Signal Meter is simple and convenient for
setting and aligning a satellite dish. Using the parameters of satellite, you
can set and align a satellite dish quickly. SFP2010 is easily and accurately.
Aim your dish with no questions with the SFP-2010 and View the channel while
aiming the dish.


Technical data



  • 3.5 inch TFT LCD screen to display the measurements and FTA TV
    programs´

  • Automatic calibration on boot up

  • Visual indication and audible indicator of signal strengh (Level-dependent
    beep)

  • Software update via USB storage device

  • Built-in Li-ion battery (rechargeable)

  • Operation in battery mode > has a 4 hour use cycle.

  • Shows the signal strength in percent and as a bar graph (bar graph)

  • Indicator Lights for 13/18 volts, signal Lock,22 kHz

  • Spectrum Analyzer

  • Automatic calculation of the angle of azimuth and elevation

  • Frequency Range: 950 – 2150 MHz / (DVB-S) QPSK

  • DiSEqC control

  • Measurement of BER and C/N

  • Electronic compass

  • Blindscan

  • OSD in 8 languages

  • Dimensions: 95 x 155 x 60mm

  • Weight: 500g

Smartmouse Phoenix 3,57/6/8/10/12 MHZ with DIP-switch

/tmp/con-5cb2704f5f332/2649_Product.jpg


  • Power of the Smart Card via a selectable switch. (3.3V and 5V) 
  • Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
    6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
  • Phoenix or Smart Mouse mode selectable with a dip-switch.
  • FTDI chipset (the drivers are already included in most Linux or Windows
    applications included)
  • 2 LED indicators for card activity (traffic)
  • Power and programming via USB. (there is no need for external power
    supply).
  • Mini USB cable is supplied.
  • Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
    other Linux and Windows applications.

What is Phoenix, Smartmouse?


There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards)  transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.


WEEE-Reg.-Nr. DE 71415134

DVD writer for Dreambox 8000

/tmp/con-5cb2704d74b6d/2575_Product.jpg


































































































































































Main
Specifications
  Product Description DVD±RW (±R DL) / DVD-RAM drive –
Serial ATA
  Dimensions (WxDxH) 12.8 cm x 12.7 cm x 1.3 cm
  Weight 170 g
  Device Type DVD±RW (±R DL) / DVD-RAM drive
  Enclosure Type Internal
  Optical Storage DVD±RW (±R DL) / DVD-RAM – 5.25″ x 1/6H (Slim
Line)
  Read Speed 24x (CD) / 8x (DVD)
  Write Speed 24x (CD) / 8x (DVD±R) / 6x (DVD±R DL)
  CD / DVD Rewrite Speed 24x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 5x
(DVD-RAM)
  Enclosure Colour Black
  Buffer Underrun Protection Buffer Under Run Free Technology
  Interface Serial ATA
Hard Drive
  Type None.
Optical
Storage
  Type DVD±RW (±R DL) / DVD-RAM – 5.25″ x 1/6H (Slim
Line)
  Access Time 130 ms (DVD), 150 ms (CD)
  Features Tilt Actuator Compensation (TAC), Magic
Speed
  Read Speed 24x (CD) / 8x (DVD)
  Write Speed 24x (CD) / 8x (DVD±R) / 6x (DVD±R DL)
  CD / DVD Rewrite Speed 24x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 5x
(DVD-RAM)
  Buffer Size 2 MB
  Media Load Type Tray
  Supported CD Formats CD-ROM
  Supported Recording Modes Multisession, disc-at-once, track-at-once,
packet writing, session-at-once, restricted overwrite, random access
write, incremental recording, multi-border recording, sequential
write
  Supported Media Types CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RAM,
DVD-RW, DVD+RW, DVD+R, DVD+R DL, DVD-R DL
  Buffer Underrun Protection Buffer Under Run Free Technology
Miscellaneous
  Compliant Standards RoHS
  Package Type Bulk
Expansion /
Connectivity
  Interfaces 1 x Serial ATA-150 – 7 pin Serial ATA
  Compatible Bays 1 x front accessible – 5.25″ x 1/6H (Slim
Line)
General
  Width 12.8 cm
  Depth 12.7 cm
  Height 1.3 cm
  Weight 170 g
  Enclosure Colour Black
  Device Type DVD±RW (±R DL) / DVD-RAM drive
  Enclosure Type Internal
  Interface Serial ATA

Mini Rotor Control Plus MP02

/tmp/con-5cb270f4069bc/2794_Product.jpg


The Stab DiSEqC 1.2 Mini-Rotor Control MP02 is the perfect tool for a
reliable DiSEqC installation. New nine button version as pictured above
right.


The Mini-Positioner Rotor Control MP02 allows for storage and automatic
recall of 4 sat positions directly from a PC-Card or a DiSEqC 1.0 receiver.
Connected to the cable between motor and receiver and directly powered by the
receiver itself, it converts DiSEqC 1.0 codes into DiSEqC 1.2 codes to drive the
motor. Besides the buttons for the manual rotation eastwards and westwards, the
mini-positioner is provided with 4 push-buttons for memorisation of 4 sat
positions, 1 push-button for memorisation of the limits; 1 push-button to remove
the limits; 1 push-button for the “zero” function allowing the motor to re-align
to the zero position at any moment.


Easy to use, in 5 minutes it enables the dish to be perfectly pointed with
only the help of the field strength meter. The Rotor Control connected to the
cable between the motor and the receiver, is a DiSEqC1.2 command generator for
turning the motor east and west, fed directly from the receiver. The ‘zero’
function, which allows the motor to return perfectly aligned to zero at any
moment, is of particular importance when the Rotor Control is permanently
installed near the receiver and when the user is not very familiar with the OSD
of the receiver. Just by pressing the ‘zero’ button, besides the alignment to
zero, all functions previously memorized are reset, thus avoiding nearly all
calls for assistance.


Technical Specification:



  • Power Supply: 13/18Vcc

  • Consumption in Standby Mode: 5mA

  • Consumption in Operating Mode: 15mA

  • Attenuation: < 6dB

  • Operating Mode: Completely Transparent

  • Operating Protocol: DiSEqC 1.0

  • Generated Commands: DiSEqC 1.2

  • Programmable Positions: 4 Positions

  • Connection: F Connector

  • Dimensions: 32 x 74 x 30 mm

  • Weight: 120 grms

Satlook digital NIT

/tmp/con-5cb270f4069bc/2791_Product.jpg

The Satlook Digital is a Swedish made Sat-TV Instrument and
Spectrum-Analyzer. The unit is made for exact alignment and adjustment of
Satellite Dishes. It is intended for professional use when high accuracy and
precise information are needed.


 


It’s easily operated without a lot of unnecessary buttons and
knobs. The basic functions are easy to get a hold on and takes only minutes to
learn. This instrument is provided with a 4.5″ B/W-monitor which either shows
normal Sat-TV channel, the frequency spectrum 920-2150 MHz (or parts thereof)
alt. Digital data. Menus/help-displays are shown on the LCD-screen (64×128)
beside the monitor.

Analog Sat-TV channels can be tuned in and viewed
upon (Multistandard Video PAL, NTSC and SECAM). Audio frequencies between
5.5-8.5 MHz can be listened to. The Spectrum can be extended (zoom in) for
correct adjustment for the polarization (“cross-polarization”). The instrument
has very high resolution and accuracy. It presents measured data _+2 dB (at
around 20 C.)

SATLOOK Digital presents, under one of the sub menus.
digital information like BER (bit error rate), constellation diagram (QPSK) and
S/N (Signal/Noise Ratio). Satlook Digital can be handle a lot of
memory-positions and both spectrum-pictures and certain frequencies can be saved
(both analog and digital transponders).

The polarization of the LNB is
switchable 13V/18V and Hi-Lo Band with 22 KHz-tone. The DISEQC-function controls
all DISEQC-accessories (like switches, LNB’s and actuators). The power of the
instrument is supplies by a built in and rechargeable battery. Even though the
instrument has lot of functions it is still very light and
flexible.


Specifications:




  • Input Frequency:   920-2150MHz (easily reduced to
    250MHz max zoom in)



  • Frequency Display: L.O. can be setup. Yes, IF default. All
    standard LNB



  • Min. Level in:        
    About 35 dBuV (noise).



  • Max Level in:        
    About 90 dBuV.



  • Attenuation:         
    15 dB attenuator on/off.



  • Display of signal level: (analogue) dB on LCD/monitor.
    Pitch-tone.



  • Display of signal level: (Digital) S/N (signal/noise-ratio) BER
    (bit error rate) Constellation (QPSK)



  • TV/Audio standard: Multi TV/Audio (PAL, NTSC, SECAM).



  • KU- C-band: Yes, selectable.



  • Audio bandwidth :    Adjustable between 5.5 MHz
    and 8.5 MHz



  • Input impedance:    75 Ohm, BNC-con.



  • Picture-screen:       4.5″-monitor,
    B/W



  • Menus:                 
    On LCD 64×128.



  • Memory:               
    100 spectrum pictures can be stored with name. Stored spectrum can be mixed
    for easy identification of satellite.-“Max hold” function.



  • Favorite channels: Both analogue and digital frequencies can be
    stored (with name). Simultaneous measuring of up to 10 channels at the same
    time. Each channel with individual setup of 13/18v and 22 kHz on/off.



  • PC-connection: Yes, RS232-output



  • Power out: Yes, 13-18V



  • 22 kHz tone: Yes, on/off.



  • DiSEqC: Yes, all 1.0 and 1.1. Also Tone burst on/off.



  • DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and
    SatSelect.



  • Battery: Rechargeable 12V, 3.5 amp/hour.



  • Operational: About 1 hour on a fully charged battery.



  • Weight: About 5 kg (11 lbs)  including battery.



  • Accessories: Nylon carrying-case.



  • Power-supply: 100-240V/50/60Hz   13.5V,1.7
    Amp.



  • Car-charger.



  • BNC/F-adapter

Satlook Digital NIT Color

/tmp/con-5cb270f4069bc/2792_Product.jpg

The SATLOOK NIT COLOR is a swedish made SAT-TV instrument and
spectrum-analyzer.The unit is made for exact alignment and adjustment of
satellite-dishes. It is intended for professional use when high accuracy and
precise information are needed.


It´s easily operated without a lot of unnecessary buttons and knobs. The
basic functions are easy to get a hold on and takes only minutes to learn. The
instrument is provided with a 5″ 16:9 LCD-monitor which either shows “Free to
air” SAT-TV-channel (Digital or Analog), the frequency spectrum 920-2150 MHz (or
parts thereof) alt. Digital data. Menus/help-displays are shown on the LCDscreen
(64×128) beside the monitor.


“Free to air” Digital (DVB-S, QPSK) and Analog SAT-TV channels can be tuned
in and viewed upon (Multistandard Video PAL, NTSC and
SECAM).
Audiofrequencies between 5.5 – 8.5 MHz can be listened to.


The spectrum can be expanded (zoom in) for correct adjustment of the
polarisation (“cross-polarisation”).The instrument has very high resolution and
accuracy. It presents measured data ±2 dB (at around 20° C). SATLOOK NIT COLOR
presents, under one of the sub menus, digital information like BER (bit error
rate), constellationdiagram (QPSK) and S/N (signal/noise ratio).


SATLOOK NIT COLOR in the bitstream (NIT = Network Information Table). The NIT
also contains info about the transponders TV and Radio channels.


SATLOOK NIT COLOR can handle a lot of memory-positions and both
spectrum-pictures and certain frequencies can be saved (both analog and digital
transponders). The polarisation of the LNB is switchable 13V/18V and the Hi-Lo
band with 22 kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like
switches, LNB´s and actuators). The power of the instrument is supplied by a
built in and rechargeable Li-lon battery. Even though the instrument has a lot
of functions it is still very light and flexible.


Technical Specification:


Input frequency: 920-2150MHz, easily reduced to250 MHz (max zoom in).

Frequency display: Yes, IF default. All standard LNB L.O. can be
setup.
Min level in: About 35 dBμV (noise).
Max level in: About 90
dBμV.
Attenuation: 15 dB attenuator on/off.
Display of
signallevel:
(analog) dB on LCD-monitor. Pitch-tone.
Accuracy: ±2 dB (at
+20° C)
Display of signallevel: (Digtal) S/N (signal/noise-ratio) BER (bit
error rate) Constellation (QPSK)
Satellite-identification: Yes, by reading
out the NIT in the bitstream. Info about the TV and Radio channels.
TV/Audio
standard: Multi TV/Audio (PAL, NTSC, SECAM).
KU- C-band: Yes,
selectable.
Audio bandwidth : Adjustable between 5.5 and 8.5 MHz
Input
impedance: 75 Ohm, BNC-con.
Picture-screen: 5” 16:9 TFT-LCD monitor
Menus:
On LCD 64×128.
Memory: 100 spectrum pictures can be stored with name. Stored
spectrum can be mixed for easy identification of
satellite.-“Maxhold”-function.
PC-connection: Yes, RS232-output
Power out:
Yes, 13-18V.
22 kHz tone: Yes, on/off.
DiSEqC: Yes, all 1.0 and 1.1. Also
Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2,
SatScan and SatSelect.
Battery: Rechargable 12v, 3.5
amp/hour.
Operational: About 1 hour on a fully charged battery.
Weight:
About 3 kg incl.battery.

Satlook Mark IV FTA

/tmp/con-5cb270f4069bc/2793_Product.jpg

EMITOR SATLOOK Mark IV FTA is a measuringinstrument developed and
manufactured in Sweden for exact alignment and adjustment of
satellite-dishes.
The instrument is provided with a 4″ TFT-color monitor
which either shows Digital Free To Air, analog TV-channel or the frequency
spectrum 920-2150 MHz (normal or expanded mode).
Soundfrequencies between 5.5
8.5 MHz can be tuned in and listened to.
The polarisation of the LNB is
switchable with a 22 kHz tone and/or with 13V/18V. DiSEqC-accessories (like
switches) can also be controlled. Even DiSEqC-actuators (level 1.2) can be run
in the Digital FTA mode.
The instrument is protected from short-circuit when
connecting the LNB.
The main functions of the Digital Free To Air receiver
are controlled on the instrument´s key-pad but can also be fully controlled with
the attached remote-control. Power to the instrument is supplied by a built in,
rechargeable battery.
The battery is recharged from the external battery
charger or the car-adaptor.
Even though the instrument has a lot of functions
it is still very flexible and easy to use.
SATLOOK Mark IV FTA weights only
about 5,5kg incl. the battery and carrying-case.


 


Input frequency: 950-2150MHz.
Min level
in: About 30 dBuV (noise).
Max level in: About 100
dBuV.
TV/Audio standard: PAL.
Input
impedance: 75 Ohm, BNC-con.
Picture-screen: 4″
Color TFT monitor
KU- C-band: Yes,
selectable.
Audio bandwidth: Adjustable between 5.5 MHz and
8.5 MHz
Measuring method:


1. Full spectrum, normal or expanded mode.
2. 4” monitor with full
picture. Optional with pos/neg video.
3. Leavel check on single channel with
LED-bar display.
4. Level check with audio from loudspeaker.
5. FTA
Digital signal readout. Max leavel: Spectral with max peaks.


Two digits LED display with max value.
LED bar with max
indication.
Highest tone from loudspeaker.
FTA Digital max signal.


Supply voltage LNB: 13-18V, switchable
Tone
switch: 22 KHz. On / Off.
DiSEqC: Standard DiSEqC,
level 1.0.
Output: Video and Audio output for connection to
TV / monitor.
Operational: About 1 hour on a fully charged
battery.
Weight: Aprox. 5.5 kg
incl.battery.
Power supply: Internal rechargeable battery
12V 3.0 Amp. External power supply, In: 100-230V. Output 13.5V 1.5 amp DC.
Caradaptor.
Accessories: Nylon carrying-case.
Adaptor BNC
/ F-connector.
Remote control for FTA set-top box.

STAB SELFSAT HH 90 – DiseqC 1.2 & USALS Motor – Premium

/tmp/con-5cb270eb31452/2777_Product.jpg

Motorizations for satellite dishes mod. HH90
Rotor SAT HH is a motor that
allows to point any satellite dish towards all visible satellites in the polar
orbit. The characteristics that make Rotor SAT HH particularly valid are as
follows:

  • Maximum precision
  • Mechanical robustness
  • Connection without external feeding, only by coaxial cable
  • Reduced dimensions
  • Maximum easiness of installation

Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible
receivers , where the rotation of the motor automatically begin when selecting
the required channel. For all those receiver not providet with DiSEqC, STAB has
developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors bythe
Tv cable.

Operating protocol DiSEqC 1.2
Maximum antenna diameter 95 cm
Maximum antenna weight 10 kg
Pole support diameter 35 – 68 mm
Antenna support length 145 mm
Antenna support diameter 42 mm
Rotation angle ±65°
Rotation speed 2,4°/s(18V);1,5°/s(13V)
Operating power supply 13 / 18 Vdc
Consumption in stand-by mode 40 mA
Consumption in operating mode 180 mA
Starting consumption (max) 350 mA
Operating temperature -40°C –  +80°C
Maximum relative humidity 100%
Programmable positions (DiSEqC1.2) 49 satellites
Preset positions (DiSEqC1.2) 28 satellites
Programmable positions (USALS) No limits
Connectors Type F
Connection Coaxial
Mechanical limits ±72°
Software programmable limits 5° – 65°
Fine tuning Pulse of 0,1°
Inclination on the pole 10° – 70°

STAB HH 100 – DiseqC 1.2 & USALS Motor – Premium

/tmp/con-5cb270eb31452/2778_Product.jpg

Motorizations for satellite dishes mod. HH100
Rotor SAT HH is a motor that
allows to point any satellite dish towards all visible satellites in the polar
orbit. The characteristics that make Rotor SAT HH particularly valid are as
follows:

  • Maximum precision
  • Mechanical robustness
  • Connection without external feeding, only by coaxial cable
  • Reduced dimensions
  • Maximum easiness of installation

Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible
receivers , where the rotation of the motor automatically begin when selecting
the required channel. For all those receiver not providet with DiSEqC, STAB has
developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors by
the Tv cable.

Operating protocol DiSEqC 1.2
Maximum antenna diameter 100 cm
Maximum antenna weight 12 kg
Pole support diameter 50 – 83 mm
Antenna support length 125 mm
Antenna support diameter 54 mm
Rotation angle ±62°
Rotation speed 1,8°/s(18V);1,2°/s(13V)
Operating power supply 13 / 18 Vdc
Consumption in stand-by mode 30 mA
Consumption in operating mode 190 mA
Starting consumption (max) 350 mA
Operating temperature -40°C – +80°C
Maximum relative humidity 100%
Programmable positions (DiSEqC1.2) 49 satellites
Preset positions (DiSEqC1.2) 28 satellites
Programmable positions (USALS) No limits
Connectors Type F
Connection Coaxial
Mechanical limits ±70°
Software programmable limits 5° – 62°
Fine tuning Pulse of 0,1°
Inclination on the pole 15° – 70°

STAB HH 120 – DiseqC 1.2 & USALS Motor – Premium

/tmp/con-5cb270eb31452/2779_Product.jpg

Motorizations for satellite dishes mod. HH120
Rotor SAT HH is a motor that
allows to point any satellite dish towards all visible satellites in the polar
orbit. The characteristics that make Rotor SAT HH particularly valid are as
follows:

  • Maximum precision
  • Mechanical robustness
  • Connection without external feeding, only by coaxial cable
  • Reduced dimensions
  • Maximum easiness of installation

Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible
receivers , where the rotation of the motor automatically begin when selecting
the required channel. For all those receiver not providet with DiSEqC, STAB has
developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors by
the Tv cable.

Operating protocol DiSEqC 1.2
Maximum antenna diameter 120 cm
Maximum antenna weight 17 kg
Pole support diameter 50 – 83 mm
Antenna support length 180 mm
Antenna support diameter 54 mm
Rotation angle ±62°
Rotation speed 0,7°/s(18V);0,4°/s(13V)
Operating power supply 13 / 18 Vdc
Consumption in stand-by mode 30 mA
Consumption in operating mode 190 mA
Starting consumption (max) 350 mA
Operating temperature -40°C – +80°C
Maximum relative humidity 100%
Programmable positions (DiSEqC1.2) 49 satellites
Preset positions (DiSEqC1.2) 28 satellites
Programmable positions (USALS) No limits
Connectors Type F
Connection Coaxial
Mechanical limits ±70°
Software programmable limits 5° – 62°
Fine tuning Pulse of 0,1°
Inclination on the pole 15° – 70°