Mini Rotor Control Plus MP02


Out of stock

SKU: 100333 Category:

Product Description

The Stab DiSEqC 1.2 Mini-Rotor Control MP02 is the perfect tool for a
reliable DiSEqC installation. New nine button version as pictured above

The Mini-Positioner Rotor Control MP02 allows for storage and automatic
recall of 4 sat positions directly from a PC-Card or a DiSEqC 1.0 receiver.
Connected to the cable between motor and receiver and directly powered by the
receiver itself, it converts DiSEqC 1.0 codes into DiSEqC 1.2 codes to drive the
motor. Besides the buttons for the manual rotation eastwards and westwards, the
mini-positioner is provided with 4 push-buttons for memorisation of 4 sat
positions, 1 push-button for memorisation of the limits; 1 push-button to remove
the limits; 1 push-button for the “zero” function allowing the motor to re-align
to the zero position at any moment.

Easy to use, in 5 minutes it enables the dish to be perfectly pointed with
only the help of the field strength meter. The Rotor Control connected to the
cable between the motor and the receiver, is a DiSEqC1.2 command generator for
turning the motor east and west, fed directly from the receiver. The ‘zero’
function, which allows the motor to return perfectly aligned to zero at any
moment, is of particular importance when the Rotor Control is permanently
installed near the receiver and when the user is not very familiar with the OSD
of the receiver. Just by pressing the ‘zero’ button, besides the alignment to
zero, all functions previously memorized are reset, thus avoiding nearly all
calls for assistance.

Technical Specification:

  • Power Supply: 13/18Vcc

  • Consumption in Standby Mode: 5mA

  • Consumption in Operating Mode: 15mA

  • Attenuation: < 6dB

  • Operating Mode: Completely Transparent

  • Operating Protocol: DiSEqC 1.0

  • Generated Commands: DiSEqC 1.2

  • Programmable Positions: 4 Positions

  • Connection: F Connector

  • Dimensions: 32 x 74 x 30 mm

  • Weight: 120 grms