Search Results for: 16

SmartWi II Client Card

/tmp/con-5cb270601665d/2670_Product.jpg

Additional wireless SmartWi II client cards . Two of these already come
shipped with the Smart-Wi II Cardsplitter, but if you want more they can be
purchased separately here.


Wireless SmartWi II client cards use a small microprocessor to handle
both communication with the receiver and the wireless part.


Features:



  • Size 109 x 54 x 0.6 mm
  • Conforming to ISO 7816 standard
  • Auto-detect clock speed from receiver
  • Firmware updateable through the SmartWi master box
  • Builtpin PCB antenna for wireless communication with the Master box
  • Minimum wireless range of 15 metres from the Master unit (indoor range)
  • LED operation indicator
  • Powered via receiver’s cam / card reader
  • purchased parts package 1 Smart Wi II client
    card

Smartmouse Phoenix Premium 3,57/6/8/10/12 MHZ with DIP-switch

/tmp/con-5cb270514bbcd/2651_Product.jpg


  • Power of the Smart Card via a selectable switch. (3.3V and 5V) 
  • Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
    6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
  • Phoenix or Smart Mouse mode selectable with a dip-switch.
  • FTDI chipset (the drivers are already included in most Linux or Windows
    applications included)
  • 2 LED indicators for card activity (traffic)
  • Power and programming via USB. (there is no need for external power
    supply).
  • Mini USB cable is supplied.
  • Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
    other Linux and Windows applications.

What is Phoenix, Smartmouse?


There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards)  transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.


WEEE-Reg.-Nr. DE 71415134

Smart-Wi client card Version 8

/tmp/con-5cb2709dd3480/2679_Product.jpg

 

Additional wireless Smart-Wi client cards. Three of these
already come shipped with the Smart-Wi Cardsplitter, but if you
want more they can be purchased separately here.

Wireless SmartWi client cards use a small microprocessor to
handle both communication with the receiver and the wireless part.

Features:

  • Size 109 x 54 x 0.6 mm
  • Conforming to ISO 7816 standard
  • Auto-detect clock speed from receiver
  • Firmware updateable through the SmartWi master box
  • Builtpin PCB antenna for wireless communication with the Master box
  • Minimum wireless range of 15 metres from the Master unit (indoor range)
  • LED operation indicator
  • Powered via receiver’s cam / card reader
  • purchased parts package 1 Smart Wi client
    card

 

Smartmouse Phoenix 3,57/6/8/10/12 MHZ with DIP-switch

/tmp/con-5cb2704f5f332/2649_Product.jpg


  • Power of the Smart Card via a selectable switch. (3.3V and 5V) 
  • Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
    6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
  • Phoenix or Smart Mouse mode selectable with a dip-switch.
  • FTDI chipset (the drivers are already included in most Linux or Windows
    applications included)
  • 2 LED indicators for card activity (traffic)
  • Power and programming via USB. (there is no need for external power
    supply).
  • Mini USB cable is supplied.
  • Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
    other Linux and Windows applications.

What is Phoenix, Smartmouse?


There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards)  transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.


WEEE-Reg.-Nr. DE 71415134

Diablo Cam II (2) Professionell

/tmp/con-5cb2704d74b6d/2608_Product.jpg

New Features:

Hardware:



  • ARM7TDMI @ 50Mhz.

  • FPGA @ 100Mhz processing speed.

  • RAM: Internal 16KB and External 1MB.

  • ROM: 256KB Internal Flash and 4MB Dataflash.

  • J-tag connection.2 Smartcard Readers ISO and Plug-In.

  • 2 Unique serial Numbers internally lasered inside.

  • Supports 3,3 and 5,0 Volts Smartcards

    Software:

  • PICO-OS Operating System.

  • Dataflash internal Filesystem FAT 12.

  • Fully programmable by PCMCIA secure protocol.

    The big differences
    with the Diablo CAM is that almost all is doubled:

    1 MB of RAM instead
    of 512 K
    4 MB of Dataflash
    Most powerfull DVB Processor Xilinx 1200

Dreambox DM8000 S HD

/tmp/con-5cb2704c8371f/2454_Product.jpg
  • 400 MHz MIPS Processor
  • Linux Operating System
  • brilliant big-size OLED – Display
  • MPEG-2 /H.264 Hardware decoding
  • TWIN DVB-S2 tuner
  • 2 x Plug&Play tuner sockets optional for DVB-S, DVB-C or DVB-T
  • 4 x DVB Common-Interface Slot
  • 2 x Smartcard-Reader
  • V.24/RS232 Interface
  • Integrated Compact Flash and SD Card Slot
  • 10/100 MBit compatible Ethernet Interface
  • 3 x USB 2.0 (1 x front, 2 x back)
  • S/PDIF Interface for digital bit stream out (AC-3)
  • 2 x Scart-interfaces
  • S-Video
  • YPrPb (Component)
  • DVI
  • Audio/Video cinch out
  • 128 MByte Flash, 256 MByte RAM
  • 2 x integrated SATA
    – support for internal HDD 3,5″ in any capacity
    – support for SATA SlimLine DVD
  • embedded WiFi (Mini-PCI device inl. antenna)
  • unlimited channel lists for TV/Radio
  • channel-change time < 1 second
  • automatic service scan
  • directly bouquet-lists
  • EPG (electronic program guide)
  • Videotext Decoder
  • multiple LNB-Switching control (DiSEqC)
  • OSD in many languages and skin-support

DreamBox DM8000 technical data

DBS-Tuner:
Frequency Range 950…2150 MHz
QPSK Demodulation EN 302 307
Signal Level – 65 dBm…- 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35 %
Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V

Video decoder:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, coaxial (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

VCR-Scart:
FBAS

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

USB:
USB 2.0 connector (3x)

SATA Interface:
for internal HDD
Compact Flash – Reader
SD Card – Reader

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB power off in Standy mode
Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:
< 30W (in operation, horizontal polarization / 400mA LNB current)
< 25W (in operation, no LNB)
< 2W (Deep-Standby-Mode)

Input voltage:
230V / 50 Hz alternating current +/- 15%
110V / 60 Hz alternating current +/- 15%

Physical specification:
Ambient Temperature +15°C…+35°C
Humidity < 80%
Size (W x D x H): 430 mm x 280 mm x 90 mm

Satlook Digital NIT Color

/tmp/con-5cb270f4069bc/2792_Product.jpg

The SATLOOK NIT COLOR is a swedish made SAT-TV instrument and
spectrum-analyzer.The unit is made for exact alignment and adjustment of
satellite-dishes. It is intended for professional use when high accuracy and
precise information are needed.


It´s easily operated without a lot of unnecessary buttons and knobs. The
basic functions are easy to get a hold on and takes only minutes to learn. The
instrument is provided with a 5″ 16:9 LCD-monitor which either shows “Free to
air” SAT-TV-channel (Digital or Analog), the frequency spectrum 920-2150 MHz (or
parts thereof) alt. Digital data. Menus/help-displays are shown on the LCDscreen
(64×128) beside the monitor.


“Free to air” Digital (DVB-S, QPSK) and Analog SAT-TV channels can be tuned
in and viewed upon (Multistandard Video PAL, NTSC and
SECAM).
Audiofrequencies between 5.5 – 8.5 MHz can be listened to.


The spectrum can be expanded (zoom in) for correct adjustment of the
polarisation (“cross-polarisation”).The instrument has very high resolution and
accuracy. It presents measured data ±2 dB (at around 20° C). SATLOOK NIT COLOR
presents, under one of the sub menus, digital information like BER (bit error
rate), constellationdiagram (QPSK) and S/N (signal/noise ratio).


SATLOOK NIT COLOR in the bitstream (NIT = Network Information Table). The NIT
also contains info about the transponders TV and Radio channels.


SATLOOK NIT COLOR can handle a lot of memory-positions and both
spectrum-pictures and certain frequencies can be saved (both analog and digital
transponders). The polarisation of the LNB is switchable 13V/18V and the Hi-Lo
band with 22 kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like
switches, LNB´s and actuators). The power of the instrument is supplied by a
built in and rechargeable Li-lon battery. Even though the instrument has a lot
of functions it is still very light and flexible.


Technical Specification:


Input frequency: 920-2150MHz, easily reduced to250 MHz (max zoom in).

Frequency display: Yes, IF default. All standard LNB L.O. can be
setup.
Min level in: About 35 dBμV (noise).
Max level in: About 90
dBμV.
Attenuation: 15 dB attenuator on/off.
Display of
signallevel:
(analog) dB on LCD-monitor. Pitch-tone.
Accuracy: ±2 dB (at
+20° C)
Display of signallevel: (Digtal) S/N (signal/noise-ratio) BER (bit
error rate) Constellation (QPSK)
Satellite-identification: Yes, by reading
out the NIT in the bitstream. Info about the TV and Radio channels.
TV/Audio
standard: Multi TV/Audio (PAL, NTSC, SECAM).
KU- C-band: Yes,
selectable.
Audio bandwidth : Adjustable between 5.5 and 8.5 MHz
Input
impedance: 75 Ohm, BNC-con.
Picture-screen: 5” 16:9 TFT-LCD monitor
Menus:
On LCD 64×128.
Memory: 100 spectrum pictures can be stored with name. Stored
spectrum can be mixed for easy identification of
satellite.-“Maxhold”-function.
PC-connection: Yes, RS232-output
Power out:
Yes, 13-18V.
22 kHz tone: Yes, on/off.
DiSEqC: Yes, all 1.0 and 1.1. Also
Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2,
SatScan and SatSelect.
Battery: Rechargable 12v, 3.5
amp/hour.
Operational: About 1 hour on a fully charged battery.
Weight:
About 3 kg incl.battery.

ALPHACRYPT CAM


The Alphacrypt CI Module is a seven in one CAM offering compatibility
with Irdeto 1+2, Viaccess 1+2, Betacrypt, Nagravision Alladin (Premiere), Conax,
Cryptoworks and Skycrypt.


Alphacrypt has its own integrated parental control system and can receive
software updates via the Astra satellite through the ORF transponder to the
latest version 3.11.


The Alphacrypt CAM is compatible with programme services like Arena, ORF,
Nova, MTV, Stream, Canal + NL, Pink Plus, Xtra Music, Kabelvision, Spice
Platinum, INXWORLD, FreeX-TV, AB Sat and many more.


Technical Specification:



  • Product Description: EuroCAM
  • Firmware / Software : 3.19
  • SAP No. : 901650
  • Standards : DVB, PCMCIA type II
  • Special Features : Supports terrestrial, satellite, cable reception
  • CAS compatible with Conax, CryptoWorks, Viaccess 1+2, Irdeto 1+2 ,
    Betacrypt ,Nagravision Alladin (Premiere)
  • Integrated parental control
  • Information regarding Software Upgrade via Satellite (only possible after
    Firmware Version 1.10): ORF-Transponder / ASTRA 19.2°Ost, 12.693 GHz H,
    Symbolrate 22.000, FEC 5/6. PID for manual search: 00546
  • Smart Card Interface: ISO7816

ALPHACRYPT LIGHT CAM


Not everyone needs all the features of a fully-fledged Alphacrypt module with
its multitude of integrated encryption systems. The Alphacrypt Light CI Module
is a 2 in 1 CAM offering compatibility with Betacrypt and Skycrypt and is the
perfect device for watching the German Premier services.


Alphacrypt has its own integrated parental control system and can receive
software updates via the Astra satellite through the ORF transponder.


Technical Specification:



  • Product Description: EuroCAM

  • SAP No. : 904410

  • Standards : DVB, PCMCIA type II

  • Special Features : Supports terrestrial, satellite, cable reception

  • CAS compatible with Betacrypt, Skycrypt

  • Integrated parental control

  • Information regarding Software Upgrade via Satellite (only possible after
    Firmware Version 1.10): ORF-Transponder / ASTRA 19.2°Ost, 12.693 GHz H,
    Symbolrate 22.000, FEC 5/6.

  • Smart Card Interface: ISO7816

SPAUN SMS 17089 NF Multiswitch

/tmp/con-5cb27073e7c15/2707_Product.jpg

The cascadable compact multiswitch with passive terrestrial is useable



  • as stand alone switch for 8 receiver,

  • for extension with Spaun SMK 17×9 F

  • as repeater amplifier or

  • as end of line multiswitches to terminate the cascadable system


Ideal in connection with the 4 QUATTRO-LNBF


Specifications:



  • developed for digital and analog signals

  • integrated energy-saving switching power supply

  • power consumption max. 54W, standby 8W

  • automatic standby function

  • terrestrial distribution independently, owing to passive distribution

  • cascadeable with Spaun SMK 17×9 F

  • distribution from 16 SAT polarization planes to 8 receiver