High performance single 40mm LNB
- Noise figure 0,2dB
- Input-LowBand: 10,7-11,7GHz
- Input-HighBand: 11,7-12,75GHz
- L.O.LowBand: 9,75
- L.O.HighBand: 10,6GHz
- Output-LowBand: 950-1950MHz
- Output-HighBand: 1100-2150MHz
- Bandumschaltung: 22kHz
High performance single 40mm LNB
What is Phoenix, Smartmouse?
There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards) transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.
WEEE-Reg.-Nr. DE 71415134
Additional wireless Smart-Wi client cards. Three of these
already come shipped with the Smart-Wi Cardsplitter, but if you
want more they can be purchased separately here.
Wireless SmartWi client cards use a small microprocessor to
handle both communication with the receiver and the wireless part.
Features:
Digital Satellite Meter with function of spectrumanalyzer and electronic
compass. The meter C-Tech SFP2010 helps you reliably and efficiently with the
correct alignment, commissioning and maintenance of satellite dishes.
The
satellite meter is easy – easy to operate by the user.The reception quality is
displayed as a numerical reading and as a bar graph (bar graph). Additionally,
the image quality of FTA TV programs to be reviewed on the 8.9-inch TFT LCD
screen.
This Digital Satellite Signal Meter is simple and convenient for
setting and aligning a satellite dish. Using the parameters of satellite, you
can set and align a satellite dish quickly. SFP2010 is easily and accurately.
Aim your dish with no questions with the SFP-2010 and View the channel while
aiming the dish.
Technical data
What is Phoenix, Smartmouse?
There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards) transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.
WEEE-Reg.-Nr. DE 71415134
Main Specifications | ||
Product Description | DVD±RW (±R DL) / DVD-RAM drive – Serial ATA | |
Dimensions (WxDxH) | 12.8 cm x 12.7 cm x 1.3 cm | |
Weight | 170 g | |
Device Type | DVD±RW (±R DL) / DVD-RAM drive | |
Enclosure Type | Internal | |
Optical Storage | DVD±RW (±R DL) / DVD-RAM – 5.25″ x 1/6H (Slim Line) | |
Read Speed | 24x (CD) / 8x (DVD) | |
Write Speed | 24x (CD) / 8x (DVD±R) / 6x (DVD±R DL) | |
CD / DVD Rewrite Speed | 24x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 5x (DVD-RAM) | |
Enclosure Colour | Black | |
Buffer Underrun Protection | Buffer Under Run Free Technology | |
Interface | Serial ATA | |
Hard Drive | ||
Type | None. | |
Optical Storage | ||
Type | DVD±RW (±R DL) / DVD-RAM – 5.25″ x 1/6H (Slim Line) | |
Access Time | 130 ms (DVD), 150 ms (CD) | |
Features | Tilt Actuator Compensation (TAC), Magic Speed | |
Read Speed | 24x (CD) / 8x (DVD) | |
Write Speed | 24x (CD) / 8x (DVD±R) / 6x (DVD±R DL) | |
CD / DVD Rewrite Speed | 24x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 5x (DVD-RAM) | |
Buffer Size | 2 MB | |
Media Load Type | Tray | |
Supported CD Formats | CD-ROM | |
Supported Recording Modes | Multisession, disc-at-once, track-at-once, packet writing, session-at-once, restricted overwrite, random access write, incremental recording, multi-border recording, sequential write | |
Supported Media Types | CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RAM, DVD-RW, DVD+RW, DVD+R, DVD+R DL, DVD-R DL | |
Buffer Underrun Protection | Buffer Under Run Free Technology | |
Miscellaneous | ||
Compliant Standards | RoHS | |
Package Type | Bulk | |
Expansion / Connectivity | ||
Interfaces | 1 x Serial ATA-150 – 7 pin Serial ATA | |
Compatible Bays | 1 x front accessible – 5.25″ x 1/6H (Slim Line) | |
General | ||
Width | 12.8 cm | |
Depth | 12.7 cm | |
Height | 1.3 cm | |
Weight | 170 g | |
Enclosure Colour | Black | |
Device Type | DVD±RW (±R DL) / DVD-RAM drive | |
Enclosure Type | Internal | |
Interface | Serial ATA |
DreamBox DM8000 technical data
DBS-Tuner:
Frequency Range 950…2150 MHz
QPSK Demodulation EN 302 307
Signal Level – 65 dBm…- 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35 %
Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V
Video decoder:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, coaxial (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS, RGB, S-Video
VCR-Scart:
FBAS
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
USB:
USB 2.0 connector (3x)
SATA Interface:
for internal HDD
Compact Flash – Reader
SD Card – Reader
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB power off in Standy mode
Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
Power consumption:
< 30W (in operation, horizontal polarization / 400mA LNB current)
< 25W (in operation, no LNB)
< 2W (Deep-Standby-Mode)
Input voltage:
230V / 50 Hz alternating current +/- 15%
110V / 60 Hz alternating current +/- 15%
Physical specification:
Ambient Temperature +15°C…+35°C
Humidity < 80%
Size (W x D x H): 430 mm x 280 mm x 90 mm
The Stab DiSEqC 1.2 Mini-Rotor Control MP02 is the perfect tool for a The Mini-Positioner Rotor Control MP02 allows for storage and automatic Easy to use, in 5 minutes it enables the dish to be perfectly pointed with Technical Specification:
reliable DiSEqC installation. New nine button version as pictured above
right.
recall of 4 sat positions directly from a PC-Card or a DiSEqC 1.0 receiver.
Connected to the cable between motor and receiver and directly powered by the
receiver itself, it converts DiSEqC 1.0 codes into DiSEqC 1.2 codes to drive the
motor. Besides the buttons for the manual rotation eastwards and westwards, the
mini-positioner is provided with 4 push-buttons for memorisation of 4 sat
positions, 1 push-button for memorisation of the limits; 1 push-button to remove
the limits; 1 push-button for the “zero” function allowing the motor to re-align
to the zero position at any moment.
only the help of the field strength meter. The Rotor Control connected to the
cable between the motor and the receiver, is a DiSEqC1.2 command generator for
turning the motor east and west, fed directly from the receiver. The ‘zero’
function, which allows the motor to return perfectly aligned to zero at any
moment, is of particular importance when the Rotor Control is permanently
installed near the receiver and when the user is not very familiar with the OSD
of the receiver. Just by pressing the ‘zero’ button, besides the alignment to
zero, all functions previously memorized are reset, thus avoiding nearly all
calls for assistance.
The Smart DigiMeter is a handy digital satellite
meter for setting and aligning a satellite dish quickly and easily. If a signal
is locked, you hear a tone alert and see an indicator light. The quality of
reception will be displayed numerical and as a bargraph. Additionally the video
quality can be checked with the 3.5 inch high definition TFT LCD screen.
Included in delivery is a power supply, all required connection cables and a
suitable bag.
Technical Data 1
1
The specifications are subject to change without notice.