High performance single 40mm LNB
- Noise figure 0,2dB
- Input-LowBand: 10,7-11,7GHz
- Input-HighBand: 11,7-12,75GHz
- L.O.LowBand: 9,75
- L.O.HighBand: 10,6GHz
- Output-LowBand: 950-1950MHz
- Output-HighBand: 1100-2150MHz
- Bandumschaltung: 22kHz
Search Results for: 15
Smartmouse Phoenix Premium 3,57/6/8/10/12 MHZ with DIP-switch
- Power of the Smart Card via a selectable switch. (3.3V and 5V)
- Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
- Phoenix or Smart Mouse mode selectable with a dip-switch.
- FTDI chipset (the drivers are already included in most Linux or Windows
applications included)
- 2 LED indicators for card activity (traffic)
- Power and programming via USB. (there is no need for external power
supply).
- Mini USB cable is supplied.
- Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
other Linux and Windows applications.
What is Phoenix, Smartmouse?
There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards) transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.
WEEE-Reg.-Nr. DE 71415134
Smart-Wi client card Version 8
Additional wireless Smart-Wi client cards. Three of these
already come shipped with the Smart-Wi Cardsplitter, but if you
want more they can be purchased separately here.
Wireless SmartWi client cards use a small microprocessor to
handle both communication with the receiver and the wireless part.
Features:
- Size 109 x 54 x 0.6 mm
- Conforming to ISO 7816 standard
- Auto-detect clock speed from receiver
- Firmware updateable through the SmartWi master box
- Builtpin PCB antenna for wireless communication with the Master box
- Minimum wireless range of 15 metres from the Master unit (indoor range)
- LED operation indicator
- Powered via receiver’s cam / card reader
- purchased parts package 1 Smart Wi client
card
Clarke Tech C-Tech SFP2010
Digital Satellite Meter with function of spectrumanalyzer and electronic
compass. The meter C-Tech SFP2010 helps you reliably and efficiently with the
correct alignment, commissioning and maintenance of satellite dishes.
The
satellite meter is easy – easy to operate by the user.The reception quality is
displayed as a numerical reading and as a bar graph (bar graph). Additionally,
the image quality of FTA TV programs to be reviewed on the 8.9-inch TFT LCD
screen.
This Digital Satellite Signal Meter is simple and convenient for
setting and aligning a satellite dish. Using the parameters of satellite, you
can set and align a satellite dish quickly. SFP2010 is easily and accurately.
Aim your dish with no questions with the SFP-2010 and View the channel while
aiming the dish.
Technical data
- 3.5 inch TFT LCD screen to display the measurements and FTA TV
programs´ - Automatic calibration on boot up
- Visual indication and audible indicator of signal strengh (Level-dependent
beep) - Software update via USB storage device
- Built-in Li-ion battery (rechargeable)
- Operation in battery mode > has a 4 hour use cycle.
- Shows the signal strength in percent and as a bar graph (bar graph)
- Indicator Lights for 13/18 volts, signal Lock,22 kHz
- Spectrum Analyzer
- Automatic calculation of the angle of azimuth and elevation
- Frequency Range: 950 – 2150 MHz / (DVB-S) QPSK
- DiSEqC control
- Measurement of BER and C/N
- Electronic compass
- Blindscan
- OSD in 8 languages
- Dimensions: 95 x 155 x 60mm
- Weight: 500g
Smartmouse Phoenix 3,57/6/8/10/12 MHZ with DIP-switch
- Power of the Smart Card via a selectable switch. (3.3V and 5V)
- Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
- Phoenix or Smart Mouse mode selectable with a dip-switch.
- FTDI chipset (the drivers are already included in most Linux or Windows
applications included)
- 2 LED indicators for card activity (traffic)
- Power and programming via USB. (there is no need for external power
supply).
- Mini USB cable is supplied.
- Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
other Linux and Windows applications.
What is Phoenix, Smartmouse?
There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards) transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.
WEEE-Reg.-Nr. DE 71415134
Clarke-Tech Single LNB 0.3 dB
- N/F : 0.3 dB
- Frequency Range : 10,7 – 12,75 GHz
- L.O. Frequency : 9,75 / 10,6 GHz
- Output freguency: 950 ~ 2150 MHz
- 40 mm Feed
- Selected Quality 0.2
DVD writer for Dreambox 8000
| Main Specifications | ||
| Product Description | DVD±RW (±R DL) / DVD-RAM drive – Serial ATA | |
| Dimensions (WxDxH) | 12.8 cm x 12.7 cm x 1.3 cm | |
| Weight | 170 g | |
| Device Type | DVD±RW (±R DL) / DVD-RAM drive | |
| Enclosure Type | Internal | |
| Optical Storage | DVD±RW (±R DL) / DVD-RAM – 5.25″ x 1/6H (Slim Line) | |
| Read Speed | 24x (CD) / 8x (DVD) | |
| Write Speed | 24x (CD) / 8x (DVD±R) / 6x (DVD±R DL) | |
| CD / DVD Rewrite Speed | 24x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 5x (DVD-RAM) | |
| Enclosure Colour | Black | |
| Buffer Underrun Protection | Buffer Under Run Free Technology | |
| Interface | Serial ATA | |
| Hard Drive | ||
| Type | None. | |
| Optical Storage | ||
| Type | DVD±RW (±R DL) / DVD-RAM – 5.25″ x 1/6H (Slim Line) | |
| Access Time | 130 ms (DVD), 150 ms (CD) | |
| Features | Tilt Actuator Compensation (TAC), Magic Speed | |
| Read Speed | 24x (CD) / 8x (DVD) | |
| Write Speed | 24x (CD) / 8x (DVD±R) / 6x (DVD±R DL) | |
| CD / DVD Rewrite Speed | 24x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 5x (DVD-RAM) | |
| Buffer Size | 2 MB | |
| Media Load Type | Tray | |
| Supported CD Formats | CD-ROM | |
| Supported Recording Modes | Multisession, disc-at-once, track-at-once, packet writing, session-at-once, restricted overwrite, random access write, incremental recording, multi-border recording, sequential write | |
| Supported Media Types | CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RAM, DVD-RW, DVD+RW, DVD+R, DVD+R DL, DVD-R DL | |
| Buffer Underrun Protection | Buffer Under Run Free Technology | |
| Miscellaneous | ||
| Compliant Standards | RoHS | |
| Package Type | Bulk | |
| Expansion / Connectivity | ||
| Interfaces | 1 x Serial ATA-150 – 7 pin Serial ATA | |
| Compatible Bays | 1 x front accessible – 5.25″ x 1/6H (Slim Line) | |
| General | ||
| Width | 12.8 cm | |
| Depth | 12.7 cm | |
| Height | 1.3 cm | |
| Weight | 170 g | |
| Enclosure Colour | Black | |
| Device Type | DVD±RW (±R DL) / DVD-RAM drive | |
| Enclosure Type | Internal | |
| Interface | Serial ATA | |
Dreambox DM8000 S HD
- 400 MHz MIPS Processor
- Linux Operating System
- brilliant big-size OLED – Display
- MPEG-2 /H.264 Hardware decoding
- TWIN DVB-S2 tuner
- 2 x Plug&Play tuner sockets optional for DVB-S, DVB-C or DVB-T
- 4 x DVB Common-Interface Slot
- 2 x Smartcard-Reader
- V.24/RS232 Interface
- Integrated Compact Flash and SD Card Slot
- 10/100 MBit compatible Ethernet Interface
- 3 x USB 2.0 (1 x front, 2 x back)
- S/PDIF Interface for digital bit stream out (AC-3)
- 2 x Scart-interfaces
- S-Video
- YPrPb (Component)
- DVI
- Audio/Video cinch out
- 128 MByte Flash, 256 MByte RAM
- 2 x integrated SATA
– support for internal HDD 3,5″ in any capacity
– support for SATA SlimLine DVD - embedded WiFi (Mini-PCI device inl. antenna)
- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- Videotext Decoder
- multiple LNB-Switching control (DiSEqC)
- OSD in many languages and skin-support
DreamBox DM8000 technical data
DBS-Tuner:
Frequency Range 950…2150 MHz
QPSK Demodulation EN 302 307
Signal Level – 65 dBm…- 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35 %
Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V
Video decoder:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, coaxial (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS, RGB, S-Video
VCR-Scart:
FBAS
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
USB:
USB 2.0 connector (3x)
SATA Interface:
for internal HDD
Compact Flash – Reader
SD Card – Reader
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB power off in Standy mode
Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
Power consumption:
< 30W (in operation, horizontal polarization / 400mA LNB current)
< 25W (in operation, no LNB)
< 2W (Deep-Standby-Mode)
Input voltage:
230V / 50 Hz alternating current +/- 15%
110V / 60 Hz alternating current +/- 15%
Physical specification:
Ambient Temperature +15°C…+35°C
Humidity < 80%
Size (W x D x H): 430 mm x 280 mm x 90 mm
Mini Rotor Control Plus MP02
The Stab DiSEqC 1.2 Mini-Rotor Control MP02 is the perfect tool for a The Mini-Positioner Rotor Control MP02 allows for storage and automatic Easy to use, in 5 minutes it enables the dish to be perfectly pointed with Technical Specification:
reliable DiSEqC installation. New nine button version as pictured above
right.
recall of 4 sat positions directly from a PC-Card or a DiSEqC 1.0 receiver.
Connected to the cable between motor and receiver and directly powered by the
receiver itself, it converts DiSEqC 1.0 codes into DiSEqC 1.2 codes to drive the
motor. Besides the buttons for the manual rotation eastwards and westwards, the
mini-positioner is provided with 4 push-buttons for memorisation of 4 sat
positions, 1 push-button for memorisation of the limits; 1 push-button to remove
the limits; 1 push-button for the “zero” function allowing the motor to re-align
to the zero position at any moment.
only the help of the field strength meter. The Rotor Control connected to the
cable between the motor and the receiver, is a DiSEqC1.2 command generator for
turning the motor east and west, fed directly from the receiver. The ‘zero’
function, which allows the motor to return perfectly aligned to zero at any
moment, is of particular importance when the Rotor Control is permanently
installed near the receiver and when the user is not very familiar with the OSD
of the receiver. Just by pressing the ‘zero’ button, besides the alignment to
zero, all functions previously memorized are reset, thus avoiding nearly all
calls for assistance.
Smart DigiMeter
The Smart DigiMeter is a handy digital satellite
meter for setting and aligning a satellite dish quickly and easily. If a signal
is locked, you hear a tone alert and see an indicator light. The quality of
reception will be displayed numerical and as a bargraph. Additionally the video
quality can be checked with the 3.5 inch high definition TFT LCD screen.
Included in delivery is a power supply, all required connection cables and a
suitable bag.
Technical Data 1
- Input frequency: 950 – 2150 MHz
- Tone alert and indicator light at signal lock
- Display of signal strength numerical and as a bargraph
- Measuring of MER and FEC
- 3.5 inch high definition TFT LCD screen to show TV programs
- Support network searching
- Auto calculation of azimuth, elevation and polarization
- Software upgrade by PC
- Rechargeable LI-ION battery (Fast charging)
- Operating time approx. 4 hours
- Dimensions: 95 x 155 x 60 mm
1
The specifications are subject to change without notice.