Motorizations for satellite dishes mod. HH90
Rotor SAT HH is a motor that
allows to point any satellite dish towards all visible satellites in the polar
orbit. The characteristics that make Rotor SAT HH particularly valid are as
follows:
- Maximum precision
- Mechanical robustness
- Connection without external feeding, only by coaxial cable
- Reduced dimensions
- Maximum easiness of installation
Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible
receivers , where the rotation of the motor automatically begin when selecting
the required channel. For all those receiver not providet with DiSEqC, STAB has
developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors bythe
Tv cable.
| Operating protocol |
DiSEqC 1.2 |
| Maximum antenna diameter |
95 cm |
| Maximum antenna weight |
10 kg |
| Pole support diameter |
35 – 68 mm |
| Antenna support length |
145 mm |
| Antenna support diameter |
42 mm |
| Rotation angle |
±65° |
| Rotation speed |
2,4°/s(18V);1,5°/s(13V) |
| Operating power supply |
13 / 18 Vdc |
| Consumption in stand-by mode |
40 mA |
| Consumption in operating mode |
180 mA |
| Starting consumption (max) |
350 mA |
| Operating temperature |
-40°C – +80°C |
| Maximum relative humidity |
100% |
| Programmable positions (DiSEqC1.2) |
49 satellites |
| Preset positions (DiSEqC1.2) |
28 satellites |
| Programmable positions (USALS) |
No limits |
| Connectors |
Type F |
| Connection |
Coaxial |
| Mechanical limits |
±72° |
| Software programmable limits |
5° – 65° |
| Fine tuning |
Pulse of 0,1° |
| Inclination on the pole |
10° – 70° |
Motorizations for satellite dishes mod. HH100
Rotor SAT HH is a motor that
allows to point any satellite dish towards all visible satellites in the polar
orbit. The characteristics that make Rotor SAT HH particularly valid are as
follows:
- Maximum precision
- Mechanical robustness
- Connection without external feeding, only by coaxial cable
- Reduced dimensions
- Maximum easiness of installation
Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible
receivers , where the rotation of the motor automatically begin when selecting
the required channel. For all those receiver not providet with DiSEqC, STAB has
developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors by
the Tv cable.
| Operating protocol |
DiSEqC 1.2 |
| Maximum antenna diameter |
100 cm |
| Maximum antenna weight |
12 kg |
| Pole support diameter |
50 – 83 mm |
| Antenna support length |
125 mm |
| Antenna support diameter |
54 mm |
| Rotation angle |
±62° |
| Rotation speed |
1,8°/s(18V);1,2°/s(13V) |
| Operating power supply |
13 / 18 Vdc |
| Consumption in stand-by mode |
30 mA |
| Consumption in operating mode |
190 mA |
| Starting consumption (max) |
350 mA |
| Operating temperature |
-40°C – +80°C |
| Maximum relative humidity |
100% |
| Programmable positions (DiSEqC1.2) |
49 satellites |
| Preset positions (DiSEqC1.2) |
28 satellites |
| Programmable positions (USALS) |
No limits |
| Connectors |
Type F |
| Connection |
Coaxial |
| Mechanical limits |
±70° |
| Software programmable limits |
5° – 62° |
| Fine tuning |
Pulse of 0,1° |
| Inclination on the pole |
15° – 70° |
Motorizations for satellite dishes mod. HH120
Rotor SAT HH is a motor that
allows to point any satellite dish towards all visible satellites in the polar
orbit. The characteristics that make Rotor SAT HH particularly valid are as
follows:
- Maximum precision
- Mechanical robustness
- Connection without external feeding, only by coaxial cable
- Reduced dimensions
- Maximum easiness of installation
Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible
receivers , where the rotation of the motor automatically begin when selecting
the required channel. For all those receiver not providet with DiSEqC, STAB has
developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors by
the Tv cable.
| Operating protocol |
DiSEqC 1.2 |
| Maximum antenna diameter |
120 cm |
| Maximum antenna weight |
17 kg |
| Pole support diameter |
50 – 83 mm |
| Antenna support length |
180 mm |
| Antenna support diameter |
54 mm |
| Rotation angle |
±62° |
| Rotation speed |
0,7°/s(18V);0,4°/s(13V) |
| Operating power supply |
13 / 18 Vdc |
| Consumption in stand-by mode |
30 mA |
| Consumption in operating mode |
190 mA |
| Starting consumption (max) |
350 mA |
| Operating temperature |
-40°C – +80°C |
| Maximum relative humidity |
100% |
| Programmable positions (DiSEqC1.2) |
49 satellites |
| Preset positions (DiSEqC1.2) |
28 satellites |
| Programmable positions (USALS) |
No limits |
| Connectors |
Type F |
| Connection |
Coaxial |
| Mechanical limits |
±70° |
| Software programmable limits |
5° – 62° |
| Fine tuning |
Pulse of 0,1° |
| Inclination on the pole |
15° – 70° |
The digital satellite finder Sembox DSM 2009, with an ultra-light weight of
less than one kg, is super easy to transport and thanks to a digital Sembox when
DSM 2009 neck strap attached to the roof is not an obstacle.
The Sembox DSM
2009 meter shows not only signal strength quality, but you still during an
installation first channel images on the TFT-LCD screen. Among other things, is
a signal to noise ratio in the digital satellite finder Sembox DSM 2009,
numerically and in bars, it also helps with acoustic signals when adjusting the
satellite antenna.
The satellite meter Sembox DSM 2009 can be easily – easily
programmed by the user. 13 V, 18 V, 22 kHz and signal-detection lights directly
under the TFT LCD screen, also an automatic calculation of position Horizontal /
Vertical.
- Input Frequency 950~2150MHz
- Input Impedance 75
- Input Level -65~ -25dBm
- USALS supported
- BER, S/N, FEC Indication, angle Calculation
- Sound Alarm & Light alarm when waek signal locked
- Auto search, blind search, NIT search, manual search supported
- Shortcut F1 to roof mode (bigger signal bar)
- Mini size, 102mm x 34mm x 180mm
- DiSEqC 1.0 DiSEqC 1.1 and DiSEqC 1.2, Auto DiSEqC Supported
- Global satellite list & multi language Technical Facts DSM2009
- Digital Satellite Meter with Digital Spectrum
- Digital meter for signal strength (in numerical value and picture)
- Outdoor menu mode for installation outside
- 22K Indicated by light
- 3.5 Inch high definition TFT LCD screen which can play channels
- AV-IN (by RCA) fuction for testing STB, camera, etc.
- LI-ION battery (2200mA), last 6 hours, fast change (2 to 3 hours)
- analog and digital spectrum
- RCU optional
- RCA output for TV
SmartBee is a simple Phoenix Programmer at
the fixed frequency of 3,579 Mhz that connects to the Serial Port of your PC. No
need for external Power Supply. No need for dedicated software. Working with any
serial software using Phoenix mode programming. 1 meter cable with RS-232 female
connector embedded and USB connector for Power Supply.
Main Features:
Serial Rs-232 – SmartBee 3,579 Mhz
Dimension: 47,00 mm/1,85 inches * 66
mm/2.6 inches * 11 mm/0.44 inches
Weight: Approx. 35 Gr. including Cable.
Cable connection: Rs-232 for programming & USB for Power Supply.
Prog. Mode: Phoenix.
Op. Freq.: Single: 3,579 Mhz (SmartBee vers. 3579)
Led: – 1 Green Data – 1 Red Power Supply
Card Detect: Yes
Drivers/Software: No Need.
- Anaconda
- Minerva
- K3 Card
- C*r*b*o
- Didem
- Daytona
- OPOS Card Rev. 1.03
- OPOS Card Rev. 1.05
- Knotcard I
- Knotcard II
- Platinumcard
- Titanium Card
- Titan Card II
- Wildcard
- M2 Card
- Firecrypt Loadercard
- Pentacard V3
Golden Interstar DiSEqC Schalter 2/1 HI-ISO
with outdoor case
Technische Daten und Eigenschaften:
Inputs/Outputs: 2 x IN / 1 x
OUT
Input Freq.:
900-2300MHz
Insertion Loss: typ. 2
dB
Isolation: 25 dB Typ.
Normen/Standards: DiSEqC
2.0, 1.0
Dimensions: 50 x 80 x
20mm
Golden Interstar DiSEqC Schalter 4/1 HI-ISO
with outdoor case
Technische Daten und Eigenschaften:
Inputs/Outputs: 4 x IN / 1 x
OUT
Input Freq.:
900-2300MHz
Insertion Loss: typ. 2
dB
Isolation: 25 dB Typ.
Normen/Standards: DiSEqC
2.0, 1.0
Dimensions: 50 x 80 x
20mm
Complement your flat-screen lifestyle. Now that you’ve got
all
those remotes out of sight, go ahead and do the same with your
components. Let your Harmony 895 or
1000 truly do all the work for you—even without line of sight.
Total Command
- No line of sight needed:
Control just about all the components you can fit into one cabinet.
- 30 m (100-foot) range: Go
ahead and build the big media room.
Simple Setup
- Just Plug It In: Close the
door, and you’re all synched up with your Harmony remote.
- Free Support: Expect total
customer satisfaction, whether you have a problem or just a question.
