Blank smartcard ISO 7816 with multi-OS
Flash: 64
KB
Eeprom: 64 KB
Crypto: RSA, DSA, ECC
Search Results for: 7
Invacom Adjustable feed horn ADF-120
Adjustable
feedhorn for Invacom C120 feed LNBs & prime focus antenna.
Offers
an adjustable beamwidth from 0.32 to 0.43
Only
to be used with Invacom C120 Flange LNBs
Adjustable beamwidth F/D 0.32 – 0.43
Universal Band 10.7 – 12.75 GHz
Fitting C 120
Inverto Black Premium IDLB-OUTL40 Quattro LNB 0,2 dB 40mm
High performance Twin 40mm LNB
- HDTV / DVB-S2 compatible
- Noise figure 0,2dB
- Input-LowBand: 10,7-11,7GHz
- Input-HighBand: 11,7-12,75GHz
- L.O.LowBand: 9,75
- L.O.HighBand: 10,6GHz
- Output-LowBand: 950-1950MHz
- Output-HighBand: 1100-2150MHz
- Bandumschaltung: 22kHz
Polytron – TST 1200
Satellite reception using an existing terrestrial cable network? Now it is possible:
POLYTRON, the well known specialist for headend applications, is launching a new, and so far unique, solution called Polyselect TST1200 for the reception of digital satellite television with its large diversity of TV channels, including HDTV and PayTV, over existing cable infrastructure. Furthermore, neither cables nor amplifiers nor antenna sockets have to be replaced and the installation could be adapted with nearly no effort in a very short time.
Compared to other solutions the number of subscribers is not limited for example to 8 or 12. Engineering and production of this innovative solution from POLYTRON is “made in Germany”.
TST 1200 is the first signal converter on the market which converts signals from the satellite IF frequency to a terrestrial frequency between 250 and 730 MHz.
The TV channels which should be distributed in houses and residences, are processed in such a way that they can be used with existing coaxial cable networks without any limitations.
After the antenna outlet the signal is re-converted to the satellite frequency by a small device which could be mounted on the existing antenna socket. Now the channels could be received by using common standard satellite receivers as well as television set with integrated settop boxes, either HD or standard resolution. Several receivers can be connected to one antenna socket. Correspondingly, the conversion unit is available in two versions, the TST-C for using directly on the antenna outlet socket and the TST-B as a converter for a whole floor.
The PolySelect TST 1200 is the ideal replacement for analogue headends especially when the analogue signal reception is no more available. Apart from the advantage that the existing network structure can still be used, the TST 1200 from POLYTRON opens up more advantages: Compared to a digital terrestrial television signal, the digital satellite signal offers a considerably higher picture quality through a higher data rate. In comparison with similar QAM and COFDM transcoding solutions, the considerable cost savings can be up to three times. More than that the variety of DVB-C and DVB-T settop boxes is limited. Due to its compact form, the TST 1200 requires only half the space of a conventional headend. Further comparison with a headend shows not least a considerably lower energy requirement.
The TST 1200 converts up to 12 digital DVB-S or DVB-S2 transponders – including several TV and Radio channels – from the satellite signal frequency into the frequency range of 250 to 730 MHz. With the TST-C or the TST-B the signal is reconverted into the standard satellite IF frequency range of 1200 to 1680 MHz. The required power for the two converters is supplied by the connected satellite receiver.
For the retailer or the installer, the installation and operation of the TST 1200 is very easy in handling by either using the programming software on notebook or PC platform by USB connection, or manually using the integrated control panel. Simply choose the input signal for each of the 12 transponder, set the frequency of the desired transponder and, if necessary, adjust the level. No more special parameters for digital satellite signals are required. The TST 1200 has four inputs for satellite IF signals provided by one to four different satellites. They can be connected over internal multi switches to the respective converter. The self-installing software which is attached to the TST1200 base unit is also available on the POLYTRON website for download.
The TST 1200 converts 12 digital DVB-S / DVB-S2 transponders out of the SAT IF layer intothe frequency range of 250 to750 MHz.
Then the signals can be transmitted via existing, terrestrial(tree type) networks. The reconversion back into the SAT IF range of 1.200 to 1.700 MHz is done by an antenna socket adaptor in the residential unit. If a proper network exists, the reconversion back into SAT IF can be done for the whole floor, too.
By usage of a switching antenna socket adaptor the TST 1200 can be added to an existing single cable solution.
The TV programs can be watched using a satellite receiver or TV with integrated satellite receiver, no matter if SDTV or HDTV!
- reception of 12 SAT trans
- ponders via terrestrial networks
- reception of SDTV and HDTV
- standard satellite receivers sufficient
- programmable with PC via USB port
- no need to change existing components
Field of application
- existing (tree type) network has to be preserved
- economically priced alternative to DVB-C/-T headends
- replaces analogue headends
- alternative to cable tv
- addition to single cable solutions
Technical Data
- Input frequency range 950-2150 MHz
- LNC DC supply 12V / max. 250mA
- Input level 60-70 dBµV
- Output frequency range 250-750 MHz
- Output level max. 90 dBµV
- Gain switchable 13 dB / 18 dB
- Connections F
- Impendance 75 Ohm
- PC interface USB
- Operating voltage 190-265 V / 50Hz
- Power consumption 30W
- Operating temperature 0-50 °C
- Dimensions (W x H x D) 400 x 335 x 70mm
150Mbps Wireless USB Adapter for Dreambox
unrivaled wireless performance for your computer. With a faster wireless
connection, you can get a better Internet experience, such as downloading,
gaming, video streaming and so on.
can perfectly interoperate with all the 802.11n/g/b devices. The TL-WN721Ns
auto-sensing capability allows high packet transfer rate of up to 150Mbps for
maximum throughput.
create a wireless connection with effortless security setup, to prevent outside
intrusion and protect your personal information from being exposed.
adaptability, as well as strong security, the USB Adapter is a perfect solution
for small office and home needs.
- 150Mbps wireless transmission rate
- Provides two methods of operation: Infrastructure and Ad-Hoc
- Quick Secure Setup, complies with WPS for worry free wireless security
- Supports 64/128-bit WEP, complies with 128 bit WPA standard(TKIP/AES),
supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X - Supports Sony PSP for online game
- Supports Windows 2000/XP/Vista/7
Seamlessly compatible with 802.11b/g/n
devices
Trimax SM-3500 real-time Spectrum Analyzer
For the first time in a economical digital meter, you are able to view the
actual channel on the screen of the meter. Now you can quickly and accurately
align the satellite AND you can instantly check the stability of the channel
right on the screen of the meter.
Transponders, Frequency, Symbol Rate,
Polarity, and other settings can be modified by the user. There is never a need
to send your meter in for a upgrade.
Meter never needs to be returned for re-calibration due to the unique
calibration system built in to the meter. Each time the meter boots up it
automatically calibrates for optimum performance so you can align each install
with confidence.
SM3500 is latest satellite meter of Trimax, it has a real time spectrum
analyzer , AV in & out, and with Trimax smart search function, can easily
find the satellite location , transponder and symbol rate, at same time search
the channel.
The SM-3500 have following 12 kinds of languages:
English,Deutsch,Russky,Turkce,French,Cesky,Portuguese,Slovencina,Polski,Español,Italian,Ellinika
- Shows strength and quality readings
- Shows channel picture
- Shows both S/N and C/N
- Show numerical reading and bar reading
- Completely programmable by the user
- Signal Lock Light
- Audio tone
- 3.5 inch TFT LCD Screen
- DiSEqC Control
- 22KHz Control
- Indicator Lights for 13/18 volts
- Indicator lights for 22 KHz
- Calculates Azimuth and Elevation
- USB port for software upgrades
- Global AC power charger included
- 12VDC power car charger included
- Carrying case included
- eck strap included
- USB software upgrade cable included
SM-3500 Specs | ||
System Capabilities | Fully DVB compliant | Yes |
LNB/Tuner input | Connector | F type, female |
Frequency Range | 950MHz-2150MHz | |
Signal Level | -65dBm~-25dBm | |
LNB Supply | 13/18V, Max 400mA | |
LNB Switch Control | 22KHz | |
DiSEqC | Ver 1.0 | |
Demodulator | Front End | QPSK |
Symbol Rate | 2Msps~45Msps | |
SCPC & MCPC Capable | Yes | |
Spectral Inversion | Auto Conversion | |
System Resource | Processor | 32 bit processor (200 MHz) |
SDRAM | 16 Mbyte | |
FLASH | 2 Mbyte | |
EEPROM | 8 Kbyte | |
Video Decoder | MPEG 2 | Main Profile @ Main Level |
Data Rate | Up to 15M bits/s | |
Resolution | 720×576, 720×480 | |
Video Format | NTSC, PAL, SECAM | |
Aspect Ratio | 4:3, 16:9 | |
MPEG Audio | MPEG 1 layer 1 & 2 | |
Type | Mono | |
Sampling rates | 32,44.1 and 48 Khz | |
Serial Data Interface | Connector | USB type |
Power Supply | Battery | 1950 mA |
Supply Voltage | 12.6 Volt | |
Charger | 90~240 Volt, 50/60 Hz | |
Connectors | Digital Tuner Input | F type, female |
Physical Specifications | Size (3.5″Wx6″Hx1.75″D) | 9.5×15.5×4.5 (cm) |
Weight (Net) 1.1 pds | 0.560 Kg |
Smartmeter S 10
The smartmeter S10 is the ultimate new development on the market. The
smartmeter S10 is a very accurate meter satellite systems – fitter. The
smartmeter S10 combines all important measurement types needed for accurate
adjustment of satellite dishes. The extensive features of smartmeter S10 exceed
anything previously offered in this price range. Convince yourself of the new
futures and judge you…
The smartmeter S10 is a handy digital instrument for quick and easy aligning
of a satellite antenna. A satellite is found, the smartmeter S10 makes a Visual
and an audible alert. Signal strength and signal quality appear as numeric
values, as bar indicator (bar graph).
As more values, it determines the signal / noise ratio (C/N), and the bit
error rate (BER). In addition to checks to quality high-resolution 8.9 cm TFT
LCD screen werden.Um which quickly align satellite antenna on the desired
satellites, many satellites are already pre-programmed.
Easily update of the firmware is via USB flash drive.
For transport and protection a protective case with strap is
used.
Functionality
* Frequency range: 950 2150 MHz
*
High-resolution 3.5 “-TFT LCD screen”
* Visual and audible
signal when satellite
* Measurement of S/N, BER, and
C/N
* MeasurementsdB
microvolts
* Spectrum Analyzer to see the signal quality
of all tags
* Display the signal numerically and as (bar
graph)
* Display the polarization
*
USALS, DiSEqC 1.0 and 1.2 DiSEqC
* Measurements in Unicode
cable one cable systems
* Automatic calculation of azimuth
and elevation angle
* Built-in
compass
* PVR-ready (Personal video
recorder)
* PVR function: TV – programmes can be stored on
a USB flash drive
* Screenshot feature: screen contents
with measurements can be saved in BMP format to a USB flash
drive
* Software update of the measuring device is with
USB flash drive
* Li ion (fast
loader)
* Operating time approx. 4 hours when using the
battery
* Weight 470 grams
*
Dimensions: (WxHxD) 105 x 170 x 45 mm
Power supply
* Operating voltage: 12.6 V
* Li oN
battery: 1950 mA
* Charger: 90-240
VAC
* Supply voltage (charger): 175-250 V ~, 50/60 Hz
Menu languages
* German, English, Russian, Slovenian, Turkish, French,
Czech, Portuguese
Accessories / included
* smartmeter S10
* Nylon carrying
case with Cape strap
* CAR adapter cable 12
V
* external power supply
* Euro
power
CTech SFP Combo 2012
Eingangsfrequenz: 950 – 2150 MHz ( DVB-S )
46 – 868 MHz ( DVB-T )
Eingangsimpedanz: 75 Ohm,
Eingangspegel: -65 ~ – 25 dBm
Pegelmessung: DVB-S in dB/uV, BER, S/N, FEC
Pegelmessung: DVB-T in dB/uV, BER, S/N, CON
Auto-, Manuell-, Blind-, NIT-, Suchlauf ( DVB-S )
Transponder (TP)-, Frequenz Suchlauf ( DVB-T )
DiSEqC 1.0 / 1.1 / 1.2, USALS, Unicable Unterstützung ( DVB-S )
13V / 18V, 22KHz (DVB-S), 5V / 12V / 18V / 24V Spannungsgestützt ( DVB-T
)
Echtzeit & Mehrfach Spectrumanalyzer ( DVB-S & DVB-T )
Winkelrechner für Motorantennenbetrieb ( DVB-S )
Mehrsprachen OSD (on screen display ), English, Deutsch, Französisch,
Italienisch,Spanisch, Schwedisch,Russisch,Arabisch, etc.
Umfassende Satellitenliste ( DVB-S ) sowie UHF – VHF
Frequenzliste ( DVB-T )
LED und Akustische Signalkennung
Satellitenname und automatische, visuelle Grad Erfassung ( DVB-S )
RCA ( Cinch – Y – Audio / AV Eingang )
Serielle Datenschnittstelle USB
Akkubetrieb Lithium Ionen
SmartWi II (Wireless Card Splitter)
SmartWi II Wireless Cardsplitter –Second generation SmartWi 2 Cardsplitter.
The clever people at Smart-Wi have redesigned this popular product giving the new Smart-Wi II Master Box a new stylish piano black exterior and two internal card slots that completely conceal the viewing card when inserted.
The SmartWi II Cardsplitter is a revolutionary wireless card sharing system allowing the user to share one subscription smartcard with up to seven receivers.
Working with both satellite and cable receivers and with Irdeto, Viaccess, Seca, Cryptoworks and Conax encryptions systems means the Smart Wi II Cardsplitter is a truly versatile device.
Stable, simple and easy to use, the Smart-Wi II Cardsplitter requires no computer experience and zero maintenance. The Smart-Wi II has been designed to hide the complexities of setting up wireless communication lines while at the same time giving you ease of use. Just plug & play and you have your second receiver solution running in minutes. Compatible with Seca Mediaguard 1 & 2, Viaccess 1 & 2, Conax, Irdeto 1 & 2 and Cryptoworks. With this wireless card splitter you can share one original smart card between all your receivers (up to 7 receivers at the same time) and the card splitter will connect to the digital receivers by the wireless slave which will be inserted into the receivers cam slot or card reader, working as the original card in your receiver. This solution is useful when you have more than one receiver in your home and you don’t want to pay monthly fee for the extra cards. SmartWi comes standard with 1xSmartWi II Master Box with PSU and 2xSmartWi II Client Card’s.
Wireless SmartWi II is a Wireless Multi Room Solution for smartcard using the ISO 7816 -1 -2 -3 standard.
With this Wireless Multi Room Solution you can share one original smart card between all your receivers.
The wireless master box will connect to the digital receivers by the wireless slave which will be inserted in the receiver’s cam (embedded cam)
It will then work as the original card was inserted direct in your receiver.
This solution is useful when you have more than 1 receiver in your home and will save you for paying additional extra monthly fee for extra cards.
SmartWi 2.0 Multi Room Solution come standard with 1 Wireless SmartWi master box, 2 Wireless SmartWi client card and a power adaptor for SmartWi master as a set.
SmartWi 2.0 Multi Room Solution Master Box
Size: 90 x 56 x 23 mm
The Wireless SmartWi 2.0 Master Box are using a fast microprossesor to control both the card reader and the wireless part.
- Follow ISO 7816 standard
- Host device auto detect clock speed.
- USB2 connection for firmware update & supply power
- Bild in antenna for wireless comunnication with slave card.
- Wireless range. Min.15 meter Master <> client unit (indoor range).
- Auto re-start after power failure.
- Stand alone operation, manage the smart card itself.
- Very fast master <-> slave communication (>30 Kbytes/s)
- LED indicator for operation
SmartWi Multi Room Solution Client Card
Size: 109 x 54 x 0,6 mm
The wireless SmartWi Client Card are using a small microprocessor to handle both communication with the receiver and the wireless part.
- Follow ISO 7816 standard
- Auto detect clock speed from the receiver
- Firmware update through SmartWi master box
- Build in antenna for wireless communication with master box
- Wireless range min.15 meter from Master unit (indoor range)
- LED indicator for operation
- Powered from receiver’s cam / card reader
Solutions
SMARTWI 2.0
SmartWi 2.0 is a Wireless Multi Room Solution witch can be used in households with more than one set top box.
SmartWi 2.0 split your subscription card and make is possible to watch different programs on each set top box with only one subscriptions card.
SmartWi 2.0 is a safe and secure system.
Each SmartWi master and client is locked together making it impossible for unauthorised to get access to you subscription card.
With this wireless Multi Room Solution you can share one original smart card between all your receivers in your household (up to 12 receivers at the same time).
The SmartWi 2.0 Multi Room Solution works on most common set top box for Satellite, Cable or Terrestrial systems and has been tested on follow encryptions systems.
- Seca Mediaguard 1 & 2
- Viaccess 1, 2 & 3
- Cryptoworks
- Conax (without pairing)
- Ir**to 1 & 2 (without pairing)
- B-CAS
- DRECrypt
- Tong Fang
SmartWi II Client Card
Additional wireless SmartWi II client cards . Two of these already come
shipped with the Smart-Wi II Cardsplitter, but if you want more they can be
purchased separately here.
Wireless SmartWi II client cards use a small microprocessor to handle
both communication with the receiver and the wireless part.
Features:
- Size 109 x 54 x 0.6 mm
- Conforming to ISO 7816 standard
- Auto-detect clock speed from receiver
- Firmware updateable through the SmartWi master box
- Builtpin PCB antenna for wireless communication with the Master box
- Minimum wireless range of 15 metres from the Master unit (indoor range)
- LED operation indicator
- Powered via receiver’s cam / card reader
- purchased parts package 1 Smart Wi II client
card