Search Results for: 22

Neotion Viaccess Secure NP4 CA Module ACS3.x

/tmp/con-5cb2705a77eb8/2611_Product.jpg

Compatible
with any VIACCESS Subscription Cards :
Canal + Canalsat (Smart Card S/N 039…) , Bis TV, AB Sat, Al Jazeera Sport (Hotbird),
Bèrbère TV, In-X-World, …


Beware, this CAM is  not compatble with TNT and / or Fransat
cards!


Brand
new upgradeable Viaccess CAM from Neotion, compatible with ANY Viaccess viewing card, includes new
Secure CA (ACS3.x) technology soon to be implemented by many channel providers
such as French broadcaster BIS TV.


Powered
by NEOTION in-house silicon NP4 technology, the NEOTION Plug-n-Play CAM enables
Digital TV sets (iDTV) and Set-Top Boxes to decode TV programmes scrambled in
Viaccess ACS 3.x (compatible with lower version).


Inserted
in the Common Interface (DVB-CI) slot, NEOTION CAM allows customers to simply
benefit from the booming emergence of MPEG-4 / MPEG-2 and HDTV scrambled
channels.


Stream
Type Supported:



  • MPEG-2,
    MPEG-4, SD and HD
  • All
    Audio Type (MPEG2, AAC, HE AAC, Dolby etc.)
  • Private
    Data
  • Teletext


Security:



  • VIACCESS
    Conditional Access System embedded (for MPEG-2 or MPEG-4, SD & HD Pay TV
    Services)
  • Unique
    and protected Authentication ID
  • Hardware
    crypto accelerators
  • Secure
    Chipset for application such as pairing (anti card sharing / anti control word
    sharing)
  • On
    chip OTP


Interfacing:



  • Plug
    and Play & User Friendly
  • DVB-CI
    high level MMI compliant
  • Languages:
    English


Standards:



  • DVB
    Common Interface
  • ISO/IEC
    EN50221 compliant
  • Smart
    Card: Full ISO 7816-3
  • RoHS
    compliant


OTA:



  • Upgrade
    from MPEG transport stream over the air
  • DVB
    SSU compliant


Memory:



  • Off
    chip SDRAM: 256Mbits
  • Off
    chip Serial Flash: 16Mbits


Size,
Weight & Power Supply:



  • PCMCIA
    Type II
  • 46g

  • 5
    volts, from any DVB-CI host

Inverto Black Premium IDLB-OUTL40 Quattro LNB 0,2 dB 40mm

High performance Twin 40mm LNB



  • HDTV / DVB-S2 compatible
  • Noise figure 0,2dB
  • Input-LowBand: 10,7-11,7GHz
  • Input-HighBand: 11,7-12,75GHz
  • L.O.LowBand: 9,75
  • L.O.HighBand: 10,6GHz
  • Output-LowBand: 950-1950MHz
  • Output-HighBand: 1100-2150MHz
  • Bandumschaltung: 22kHz

sus4 DiSEqC 2 in 1 Switch incl. weatherproof enclosure

/tmp/con-5cb270acca34d/2689_Product.jpg



























Input/Output: 2 in/1 out
Frequency range: 850~2250 MHz
Tranmission loss: 2.5 dB
Cross decoupling: 25 dB
power consumption: 30 mA
Direct current brownout: 0.15 V
max. DC outlet: 450 mA
Trigger critereon: DiSEqC 2.0 auto








Trimax SM-3500 real-time Spectrum Analyzer

/tmp/con-5cb270f564897/2784_Product.jpg

 



 


For the first time in a economical digital meter, you are able to view the
actual channel on the screen of the meter. Now you can quickly and accurately
align the satellite AND you can instantly check the stability of the channel
right on the screen of the meter.

Transponders, Frequency, Symbol Rate,
Polarity, and other settings can be modified by the user. There is never a need
to send your meter in for a upgrade.


Meter never needs to be returned for re-calibration due to the unique
calibration system built in to the meter. Each time the meter boots up it
automatically calibrates for optimum performance so you can align each install
with confidence.


SM3500 is latest satellite meter of Trimax, it has a real time spectrum
analyzer , AV in & out, and with Trimax smart search function, can easily
find the satellite location , transponder and symbol rate, at same time search
the channel.

The SM-3500 have following 12 kinds of languages:

English,Deutsch,Russky,Turkce,French,Cesky,Portuguese,Slovencina,Polski,Español,Italian,Ellinika



  • Shows strength and quality readings
  • Shows channel picture
  • Shows both S/N and C/N
  • Show numerical reading and bar reading
  • Completely programmable by the user
  • Signal Lock Light
  • Audio tone
  • 3.5 inch TFT LCD Screen
  • DiSEqC Control
  • 22KHz Control
  • Indicator Lights for 13/18 volts
  • Indicator lights for 22 KHz
  • Calculates Azimuth and Elevation
  • USB port for software upgrades
  • Global AC power charger included
  • 12VDC power car charger included
  • Carrying case included
  • eck strap included
  • USB software upgrade cable included

 










































































































SM-3500 Specs

System Capabilities

Fully DVB compliant

Yes

LNB/Tuner input

Connector

F type, female

Frequency Range

950MHz-2150MHz

Signal Level

-65dBm~-25dBm

LNB Supply

13/18V, Max 400mA

LNB Switch Control

22KHz

DiSEqC

Ver 1.0

Demodulator

Front End

QPSK

Symbol Rate

2Msps~45Msps

SCPC & MCPC Capable

Yes

Spectral Inversion

Auto Conversion

System Resource

Processor

32 bit processor (200 MHz)

SDRAM

16 Mbyte

FLASH

2 Mbyte

EEPROM

8 Kbyte

Video Decoder

MPEG 2

Main Profile @ Main Level

Data Rate

Up to 15M bits/s

Resolution

720×576, 720×480

Video Format

NTSC, PAL, SECAM

Aspect Ratio

4:3, 16:9

MPEG Audio

MPEG 1 layer 1 & 2

 

Type

Mono

Sampling rates

32,44.1 and 48 Khz

Serial Data Interface

Connector

USB type

Power Supply

Battery

1950 mA

Supply Voltage

12.6 Volt

Charger

90~240 Volt, 50/60 Hz

Connectors

Digital Tuner Input

F type, female

Physical Specifications

Size (3.5″Wx6″Hx1.75″D)

9.5×15.5×4.5 (cm)

Weight (Net) 1.1 pds

0.560 Kg

CTech SFP Combo 2012

/tmp/con-5cb270f564897/2781_Product.jpg




  • Eingangsfrequenz: 950 – 2150 MHz ( DVB-S )


  • 46 –   868 MHz ( DVB-T )


  • Eingangsimpedanz:  75 Ohm,


  • Eingangspegel: -65 ~ – 25 dBm


  • Pegelmessung:  DVB-S in dB/uV, BER, S/N, FEC


  • Pegelmessung:  DVB-T in dB/uV, BER, S/N, CON


  • Auto-, Manuell-, Blind-, NIT-, Suchlauf ( DVB-S )


  • Transponder (TP)-, Frequenz Suchlauf ( DVB-T )


  • DiSEqC 1.0 / 1.1 / 1.2, USALS, Unicable Unterstützung ( DVB-S )


  • 13V / 18V, 22KHz (DVB-S), 5V / 12V / 18V / 24V Spannungsgestützt ( DVB-T
    )


  • Echtzeit & Mehrfach Spectrumanalyzer ( DVB-S & DVB-T )


  • Winkelrechner für Motorantennenbetrieb ( DVB-S )


  • Mehrsprachen OSD (on screen display ), English, Deutsch, Französisch,
    Italienisch,Spanisch, Schwedisch,Russisch,Arabisch, etc.


  • Umfassende Satellitenliste ( DVB-S ) sowie UHF – VHF


  • Frequenzliste ( DVB-T )


  • LED und Akustische Signalkennung


  • Satellitenname und automatische, visuelle Grad Erfassung ( DVB-S )


  • RCA ( Cinch – Y – Audio / AV Eingang )


  • Serielle Datenschnittstelle USB


  • Akkubetrieb Lithium Ionen

Clarke Tech C-Tech SFP2010

/tmp/con-5cb270f564897/2780_Product.jpg

Digital Satellite Meter with function of spectrumanalyzer and electronic
compass. The meter C-Tech SFP2010 helps you reliably and efficiently with the
correct alignment, commissioning and maintenance of satellite dishes.
The
satellite meter is easy – easy to operate by the user.The reception quality is
displayed as a numerical reading and as a bar graph (bar graph). Additionally,
the image quality of FTA TV programs to be reviewed on the 8.9-inch TFT LCD
screen.
This Digital Satellite Signal Meter is simple and convenient for
setting and aligning a satellite dish. Using the parameters of satellite, you
can set and align a satellite dish quickly. SFP2010 is easily and accurately.
Aim your dish with no questions with the SFP-2010 and View the channel while
aiming the dish.


Technical data



  • 3.5 inch TFT LCD screen to display the measurements and FTA TV
    programs´

  • Automatic calibration on boot up

  • Visual indication and audible indicator of signal strengh (Level-dependent
    beep)

  • Software update via USB storage device

  • Built-in Li-ion battery (rechargeable)

  • Operation in battery mode > has a 4 hour use cycle.

  • Shows the signal strength in percent and as a bar graph (bar graph)

  • Indicator Lights for 13/18 volts, signal Lock,22 kHz

  • Spectrum Analyzer

  • Automatic calculation of the angle of azimuth and elevation

  • Frequency Range: 950 – 2150 MHz / (DVB-S) QPSK

  • DiSEqC control

  • Measurement of BER and C/N

  • Electronic compass

  • Blindscan

  • OSD in 8 languages

  • Dimensions: 95 x 155 x 60mm

  • Weight: 500g

Dreambox DM8000 S HD

/tmp/con-5cb2704c8371f/2454_Product.jpg
  • 400 MHz MIPS Processor
  • Linux Operating System
  • brilliant big-size OLED – Display
  • MPEG-2 /H.264 Hardware decoding
  • TWIN DVB-S2 tuner
  • 2 x Plug&Play tuner sockets optional for DVB-S, DVB-C or DVB-T
  • 4 x DVB Common-Interface Slot
  • 2 x Smartcard-Reader
  • V.24/RS232 Interface
  • Integrated Compact Flash and SD Card Slot
  • 10/100 MBit compatible Ethernet Interface
  • 3 x USB 2.0 (1 x front, 2 x back)
  • S/PDIF Interface for digital bit stream out (AC-3)
  • 2 x Scart-interfaces
  • S-Video
  • YPrPb (Component)
  • DVI
  • Audio/Video cinch out
  • 128 MByte Flash, 256 MByte RAM
  • 2 x integrated SATA
    – support for internal HDD 3,5″ in any capacity
    – support for SATA SlimLine DVD
  • embedded WiFi (Mini-PCI device inl. antenna)
  • unlimited channel lists for TV/Radio
  • channel-change time < 1 second
  • automatic service scan
  • directly bouquet-lists
  • EPG (electronic program guide)
  • Videotext Decoder
  • multiple LNB-Switching control (DiSEqC)
  • OSD in many languages and skin-support

DreamBox DM8000 technical data

DBS-Tuner:
Frequency Range 950…2150 MHz
QPSK Demodulation EN 302 307
Signal Level – 65 dBm…- 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35 %
Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V

Video decoder:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, coaxial (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

VCR-Scart:
FBAS

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

USB:
USB 2.0 connector (3x)

SATA Interface:
for internal HDD
Compact Flash – Reader
SD Card – Reader

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB power off in Standy mode
Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:
< 30W (in operation, horizontal polarization / 400mA LNB current)
< 25W (in operation, no LNB)
< 2W (Deep-Standby-Mode)

Input voltage:
230V / 50 Hz alternating current +/- 15%
110V / 60 Hz alternating current +/- 15%

Physical specification:
Ambient Temperature +15°C…+35°C
Humidity < 80%
Size (W x D x H): 430 mm x 280 mm x 90 mm

Satlook digital NIT

/tmp/con-5cb270f4069bc/2791_Product.jpg

The Satlook Digital is a Swedish made Sat-TV Instrument and
Spectrum-Analyzer. The unit is made for exact alignment and adjustment of
Satellite Dishes. It is intended for professional use when high accuracy and
precise information are needed.


 


It’s easily operated without a lot of unnecessary buttons and
knobs. The basic functions are easy to get a hold on and takes only minutes to
learn. This instrument is provided with a 4.5″ B/W-monitor which either shows
normal Sat-TV channel, the frequency spectrum 920-2150 MHz (or parts thereof)
alt. Digital data. Menus/help-displays are shown on the LCD-screen (64×128)
beside the monitor.

Analog Sat-TV channels can be tuned in and viewed
upon (Multistandard Video PAL, NTSC and SECAM). Audio frequencies between
5.5-8.5 MHz can be listened to. The Spectrum can be extended (zoom in) for
correct adjustment for the polarization (“cross-polarization”). The instrument
has very high resolution and accuracy. It presents measured data _+2 dB (at
around 20 C.)

SATLOOK Digital presents, under one of the sub menus.
digital information like BER (bit error rate), constellation diagram (QPSK) and
S/N (Signal/Noise Ratio). Satlook Digital can be handle a lot of
memory-positions and both spectrum-pictures and certain frequencies can be saved
(both analog and digital transponders).

The polarization of the LNB is
switchable 13V/18V and Hi-Lo Band with 22 KHz-tone. The DISEQC-function controls
all DISEQC-accessories (like switches, LNB’s and actuators). The power of the
instrument is supplies by a built in and rechargeable battery. Even though the
instrument has lot of functions it is still very light and
flexible.


Specifications:




  • Input Frequency:   920-2150MHz (easily reduced to
    250MHz max zoom in)



  • Frequency Display: L.O. can be setup. Yes, IF default. All
    standard LNB



  • Min. Level in:        
    About 35 dBuV (noise).



  • Max Level in:        
    About 90 dBuV.



  • Attenuation:         
    15 dB attenuator on/off.



  • Display of signal level: (analogue) dB on LCD/monitor.
    Pitch-tone.



  • Display of signal level: (Digital) S/N (signal/noise-ratio) BER
    (bit error rate) Constellation (QPSK)



  • TV/Audio standard: Multi TV/Audio (PAL, NTSC, SECAM).



  • KU- C-band: Yes, selectable.



  • Audio bandwidth :    Adjustable between 5.5 MHz
    and 8.5 MHz



  • Input impedance:    75 Ohm, BNC-con.



  • Picture-screen:       4.5″-monitor,
    B/W



  • Menus:                 
    On LCD 64×128.



  • Memory:               
    100 spectrum pictures can be stored with name. Stored spectrum can be mixed
    for easy identification of satellite.-“Max hold” function.



  • Favorite channels: Both analogue and digital frequencies can be
    stored (with name). Simultaneous measuring of up to 10 channels at the same
    time. Each channel with individual setup of 13/18v and 22 kHz on/off.



  • PC-connection: Yes, RS232-output



  • Power out: Yes, 13-18V



  • 22 kHz tone: Yes, on/off.



  • DiSEqC: Yes, all 1.0 and 1.1. Also Tone burst on/off.



  • DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and
    SatSelect.



  • Battery: Rechargeable 12V, 3.5 amp/hour.



  • Operational: About 1 hour on a fully charged battery.



  • Weight: About 5 kg (11 lbs)  including battery.



  • Accessories: Nylon carrying-case.



  • Power-supply: 100-240V/50/60Hz   13.5V,1.7
    Amp.



  • Car-charger.



  • BNC/F-adapter