TECH SPECS
Specifications
Output Resolution: 4K (3840 x 2160)
CPU : Hisilicon Quad-core 64bit
GPU : Multi-core high-performance GPU
RAM: 2GB DDR4
Storage: 16GB eMMC
Operating System: Android 7
Networking
2.4G / 5.0G Dual-band – Dual Antenna
Gigabit Ethernet 10/100/1000M
Decoder
Video decoder : 4K@60fps),VP9,H.265(HEVC) , AVS , H.264(AVC, MVC) , Real , MPEG1/2/4 , VC-1
Video Format : TS , MKV , FLV , MOV , AVI , RM , MP4
Audio Format : MPEG-1 Layer 1,2 , AAC-LC , HE AAC V1/V2
Image decoder : JPG , BMP , GIF , PNG
Support Language : Global
Dimensions
Length: 105mm
Width: 105mm
Thickness: 22mm (Install Antenna 121mm)
Color: Black
Ports
USB2.0 : 1
USB3.0 : 1
Power Interface : 1
IR Extension : 1
S/PDIF : 1
HDMI2.0a (CEC) : 1
Gigabit LAN : 1
Dual-Band Antenna : 1
Power Input
Type : 12V Adapter
Power Consumption : Max. 15W
Standby Power : Max. 0.5W (Ultra low power)
NOTE: Features listed here may require additional and/or periodic firmware updates. We are not responsible for third party firmware and features, addons, patches, softcams, plugins or third party services and the availability of such services on this receiver (such as YouTube, etc.). Your warranty covers receiver hardware only and is not extended to software updates or setup, we may however extend this at our discretion to offer support for FTA (free to air) reception where the service provider permits connection to their network.
Further details can be found in our Terms and Conditions HERE.
- Power of the Smart Card via a selectable switch. (3.3V and 5V)
- Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
- Phoenix or Smart Mouse mode selectable with a dip-switch.
- FTDI chipset (the drivers are already included in most Linux or Windows
applications included)
- 2 LED indicators for card activity (traffic)
- Power and programming via USB. (there is no need for external power
supply).
- Mini USB cable is supplied.
- Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
other Linux and Windows applications.
What is Phoenix, Smartmouse?
There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards) transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.
WEEE-Reg.-Nr. DE 71415134
With this hub you are able to connect several USB devices, like a printer,
memorystick or camera, to your PC. Thanks to the included poweradapter there is
always enough power.
Cable and power adapter are included.
KÖNIG 7 PORT USB 2.0 HUB |
Specifications and features of KÖNIG 7 PORT USB 2.0
HUB
- 7x downstream port A-female
- 1x upstream port B-female
- Interface: USB 2.0
- Maximum dataspeed USB 2.0: 480 Mbps
- Downwards compatible
- Hot swappable
- Compatible with: Mac OS 9, OS 10, Windows 98SE, 2000 en
XP
|
- Power of the Smart Card via a selectable switch. (3.3V and 5V)
- Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
- Phoenix or Smart Mouse mode selectable with a dip-switch.
- FTDI chipset (the drivers are already included in most Linux or Windows
applications included)
- 2 LED indicators for card activity (traffic)
- Power and programming via USB. (there is no need for external power
supply).
- Mini USB cable is supplied.
- Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
other Linux and Windows applications.
What is Phoenix, Smartmouse?
There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards) transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.
WEEE-Reg.-Nr. DE 71415134
Titaniumcard 1 + 2
OposCard
M-2Card
Knotcard 1 + 2
Platinum Card
TitanCard 2.0
DragonLoaderCard
With this hub you are able to connect several USB devices, like a printer,
memorystick or camera, to your PC. Thanks to poweradapter (not
included) there is always enough power.
Cable is included.
KÖNIG 7 PORT USB 2.0 HUB |
Specifications and features of KÖNIG 7 PORT USB 2.0
HUB
- 7x downstream port A-female
- 1x upstream port B-female
- Interface: USB 2.0
- Maximum dataspeed USB 2.0: 480 Mbps
- Downwards compatible
- Hot swappable
- Compatible with: Mac OS 9, OS 10, Windows 98SE, 2000 en
XP
|
SmartBee is a simple Phoenix Programmer at
the fixed frequency of 3,579 Mhz that connects to the Serial Port of your PC. No
need for external Power Supply. No need for dedicated software. Working with any
serial software using Phoenix mode programming. 1 meter cable with RS-232 female
connector embedded and USB connector for Power Supply.
Main Features:
Serial Rs-232 – SmartBee 3,579 Mhz
Dimension: 47,00 mm/1,85 inches * 66
mm/2.6 inches * 11 mm/0.44 inches
Weight: Approx. 35 Gr. including Cable.
Cable connection: Rs-232 for programming & USB for Power Supply.
Prog. Mode: Phoenix.
Op. Freq.: Single: 3,579 Mhz (SmartBee vers. 3579)
Led: – 1 Green Data – 1 Red Power Supply
Card Detect: Yes
Drivers/Software: No Need.
- Anaconda
- Minerva
- K3 Card
- C*r*b*o
- Didem
- Daytona
- OPOS Card Rev. 1.03
- OPOS Card Rev. 1.05
- Knotcard I
- Knotcard II
- Platinumcard
- Titanium Card
- Titan Card II
- Wildcard
- M2 Card
- Firecrypt Loadercard
- Pentacard V3
The cascadable compact multiswitch with passive terrestrial is useable
- as stand alone switch for 8 receiver,
- for extension with Spaun SMK 17×9 F
- as repeater amplifier or
- as end of line multiswitches to terminate the cascadable system
Ideal in connection with the 4 QUATTRO-LNBF
Specifications:
- developed for digital and analog signals
- integrated energy-saving switching power supply
- power consumption max. 54W, standby 8W
- automatic standby function
- terrestrial distribution independently, owing to passive distribution
- cascadeable with Spaun SMK 17×9 F
- distribution from 16 SAT polarization planes to 8 receiver