Technische Daten:
Technische Daten:
The CAS Interface 3 Plus from Duolabs combines all the functionality of the Cas Interface 2 into a single unit. Add to that the fact that the CAS3+ can emulate a Common Interface (EN50221) slot makes this the most useful programmer on the market! Included in the pack is the Cas Interface 3 Plus Unit, 20 pin female cable – 30 cm, repair and Dummy Card.
Features:
Supported Smartcards:
AVR based: Funcard/Funcard2 (AT90S8515 + 24C64), PrussianCard/Funcard3 (AT90S8515 + 24C128), PrussianCard2/Funcard4 (AT90S8515 + 24C256), PrussianCard3/Funcard5 (AT90S8515 + 24C512), PrussianCard4/Funcard6 (AT90S8515 + 24C1024), PrussianCard5/Funcard7 (AT90S8515 + 2*24C1024), JupiterCard (AT90S2343 + 24C16), JupiterCard2 (AT90S8535 + 24C64), FunCard ATmega161 (ATmega161 + 24C64), FunCard ATmega163 (ATmega163 + 24C256), FunCard Atmega8515/Fun Key2 (Atmega 8515 + 24C256), BlackCard (ATmega128 + 24C256)
PIC-based: Wafercard (16C84, 16F84, 16F84A), Goldcard (16F84/16F84A + 24C16), Silvercard (16F876/16F877 + 24C64), Greencard (16F876/16F877 + 24C128), Greencard2 (16F876/16F877 + 24C256), Bluecard (16F84A + 24C64), CanaryCard (16F628 + 24C16), EmeraldCard (16F628 + 24C64), Singlepic (16F876, 16F627, 16F628)
OS Cards: Titanium, OPOS, Knotcard, M-II etc
The Cas Interface 2 is connected to the USB port of your PC and
it’s USB 1.1 and 2.0 compliant. Cas Interface 2 it’s a Full Speed device and
consequently catches up speed to 12Mbit. Thanks USB port you don’t need external
power supply.
Drivers will be released for all the Windows versions: Win 95,
Win 98, Win ME, Win 2000 and Win XP.
Multifunctional Output . To connect
Add-On’s and connect to receivers.
USB – Full Speed 12 Mbit connection.
Gives power supply to the Cas Interface 2. The Full Speed USB connection it’s
not so common on all the low cost devices such as Smartcard reader/writers etc.
Most of these devices uses a “Low Speed” connections.
Status Led . Helps
you during the usage.
PCMCIA Connector. This is an High Quality PCMCIA
connector for Cams programming.
Devices Supported
Cam and
receivers Sidsa based.
Magic Cam and all Cams Sidsa processor based
(Magic Module, Magic KIT, Axas, Universal, Kid Cam, Matrix, Matrix Reloaded,
Beta etc). The time for programming is remarkablly diminished from the Cas
Interface. The time in order to program completely a CAM is around 4 minutes in
order to transform one Magic Cam in Matrix Reloaded. Moreover several receivers
using the same Sidsa technology are supported through 20 pins Mutifunctional
Output and a flat cable. Xilinx CPLD rogramming for 9526 and 9672 is also
supported. The great revolution is given the fastest programming through PCMCIA
connector or the Multifunctional output (for receivers).
Joker Cam,
Ice Crypt Cam etc.
Maybe the greatest innovation is the programming and
re-programming of the Chip Atmel in the Joker Cam or Ice Crypt Cam. Through the
aid of the PCMCIA connection and an Add-On like the old Cas Card it will be
possible to program the a Joker Cam or Ice Crypt Cam. The insertion is easy and
it doesn’t require any particular skill. The re-programming of the Atmel will
concur to repair the defective Joker Cam and Ice Crypt. The re-programming takes
approximately 2 minutes and allows to revitalize your Cam everytime you
want.
The AT90SC6464C is a low-power, high-performance, 8-bit
microcontroller with Flash
program memory, EEPROM data memory and a
crypto-coprocessor, based on the
AVR enhanced RISC architecture. By executing
powerful instructions in a single clock
cycle, the AT90SC6464C achieves
throughputs close to 1 MIPS per MHz. Its Harvard
Features
General
• High-performance, Low-power AVR® (AVR3
Core) Enhanced RISC Architecture
• 133 Powerful Instructions (Most Executed in a Single Clock
Cycle)
• Low-power Idle and Power-down Modes
• Bond Pad Locations
Conforming to ISO 7816/2
• ESD Protection to ± 6000V
• Operating Ranges:
from 2.7V to 3.3V and 4.5V to 5.5V
• Compliant with GSM, 3GPP and EMV
Specifications
• Available in Wafers, Modules and Industry-standard
Packages
Memory
• 64K Bytes of EEPROM, Including 64-byte OTP
Area and 64-byte Bit-addressable Area
• 1 to 128-byte Program/Erase
• 2 ms
Program, 2 ms Erase
• Typically More than 500,000 Write/Erase Cycles
• 10
Years Data Retention
• 64K Bytes of Flash Program Memory
• 128-byte Page
Programming
• Minimum 10,000 Write/Erase Cycles
• 10 Years Data
Retention
• 3K Bytes of RAM
Blank smartcard ISO 7816 with multi-OS
Flash: 64
KB
Eeprom: 64 KB
Crypto: RSA, DSA, ECC
