TECH SPECS
Specifications
Output Resolution: 4K (3840 x 2160)
CPU : Hisilicon Quad-core 64bit
GPU : Multi-core high-performance GPU
RAM: 2GB DDR4
Storage: 16GB eMMC
Operating System: Android 7
Networking
2.4G / 5.0G Dual-band – Dual Antenna
Gigabit Ethernet 10/100/1000M
Decoder
Video decoder : 4K@60fps)，VP9，H.265(HEVC) , AVS , H.264(AVC, MVC) , Real , MPEG1/2/4 , VC-1
Video Format : TS , MKV , FLV , MOV , AVI , RM , MP4
Audio Format : MPEG-1 Layer 1,2 , AAC-LC , HE AAC V1/V2
Image decoder : JPG , BMP , GIF , PNG
Support Language : Global
Dimensions
Length: 105mm
Width: 105mm
Thickness: 22mm (Install Antenna 121mm)
Color: Black
Ports
USB2.0 : 1
USB3.0 : 1
Power Interface : 1
IR Extension : 1
S/PDIF : 1
HDMI2.0a (CEC) : 1
Gigabit LAN : 1
Dual-Band Antenna : 1
Power Input
Type : 12V Adapter
Power Consumption : Max. 15W
Standby Power : Max. 0.5W (Ultra low power)
NOTE: Features listed here may require additional and/or periodic firmware updates. We are not responsible for third party firmware and features, addons, patches, softcams, plugins or third party services and the availability of such services on this receiver (such as YouTube, etc.). Your warranty covers receiver hardware only and is not extended to software updates or setup, we may however extend this at our discretion to offer support for FTA (free to air) reception where the service provider permits connection to their network.
Further details can be found in our Terms and Conditions HERE.
VU + Uno 4K SE Linux UHD set top box
Digital satellite receiver for UHD and HD TV and radio programs.
At the heart of the VU + Uno 4K SE is the 2x 1,700 MHz ARM DualCore processor. Experience UltraHighDefinition (UHD) TV with the VU + Uno 4K SE set-top box.
What is a DVB-S2X FBC Twin Tuner?
A DVB-S2 FBC Twin Tuner has 8 demodulators.
With two conventional (eg twin LNB) satellite feeders, the tuner is comparable to 2 conventional and 6 additional tuners operating in loop-through mode. You can watch, stream or record simultaneously stations from 8 different transponders from 2 different Sat levels.
In SCR operation (Unicable) with 8 frequencies, this corresponds to 8 conventional tuners.
What is a DVB-C FBC tuner?
A DVB-C FBC tuner has 8 demodulators. This corresponds to a receiver with 8 conventional DVB-C tuners.
You can watch, stream or record 8 channels at the same time.
Key Features:
- Very fast switching times
- 2.4 “TFT LCD Display – MiniTV
- WebKit Browser
- HD transcoding
- HbbTV
- HDMI 2.0 output
- HDMI 2.0 input
- Gigabit LAN
- 1x tuner slot for eg DVB-S2 / DVB-C Full Band Capture (FBC) tuner
- Plug & Play removable frame for 2.5 “SATA HDDs (maximum 10.5mm HDD height)
- USB 3.0
- ARM CPU (2x 1,700 MHz)
- eMMC flash memory
- HVEC / H.265 video decoding
- External 12V power supply
Technical Highlights:
- 1,700 MHz ARM DualCore processor
- 4096 MB Flash (eMMC)
- 2048 MB of DDR3 DRAM
- Gigabit LAN (10/100/1000 Mbps)
- 2.4 “TFT LCD display
- 1x DVB Common-Interface slot
- 1x smartcard reader (Xcrypt)
- 2x USB 3.0 (back)
- Plug & Play removable frame for 2.5 “SATA HDDs (maximum 10.5mm HDD height)
- S / PDIF audio output optical (digital)
- 1x HDMI 2.0 video / audio output (digital)
- 1x HDMI 2.0 input (digital)
- unlimited channel list for TV and radio
- EPG (Electronic Program Guide) support
- Support of bouquet lists (favorites lists)
- OSD in many languages
- UI appearance versatile (skin support)
- Expandable with many free plugins (apps)
- automatic / manual channel search
- DiSEqC 1.0 / 1.1 / 1.2, USALS
- SCR / CSS (EN50494 & EN50607)
- External 12 volt power supply
- power switch
- RS232 – service interface
- Free apps available for iOS and Android
Video decoding:
- Video compression HVEC / H.265, MPEG-2 / H.264 and MPEG-1 compatible
- Video standard PAL G / 25 Hz, NTSC
- Picture format 4: 3/16: 9
- Letterbox for 4: 3 TV sets
Output Digital:
- Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
- S / PDIF output optical (AC3)
- Audio encoding:
- Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3
- Audio Mode Dual (main / sub), stereo
- Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
power consumption:
- <13W (in operation, with LNB)
- <12W (in operation, without LNB)
- <0.5W (deep standby mode)
External power supply:
- Input: 110 – 240V AC / 50 – 60Hz / 1.0A
- Output: 12V = / 3.0A
General:
- Ambient temperature + 15 ° C … + 35 ° C
- Humidity <80%
- Dimensions (W x D x H): 280 mm x 222 mm x 50 mm
- Weight: 1.4 kg
Package includes:
- 1x VU + Uno 4K SE UHD Receiver
- 1x remote control
- 1x quick manual (german / english)
- 1x external IR receiver
- 1x HDMI cable
- 2x batteries (AA)
- 1x power supply (110-240V / 12V)
NOTE: Features listed here may require additional and/or periodic firmware updates. We are not responsible for third party firmware and features, addons, patches, softcams, plugins or third party services and the availability of such services on this receiver (such as YouTube, etc.). Your warranty covers receiver hardware only and is not extended to software updates or setup, we may however extend this at our discretion to offer support for FTA (free to air) reception where the service provider permits connection to their network. Further details can be found in our Terms and Conditions HERE.
Model: regular
Stroke Length: 18″
Speed: 5,6mm/sec
Resolution(Reed): 48 Pulse/inch
Input Voltage 36 VDC
Brandnew HD Receiver with furture
The new GigabBlue receiver is to set completely new yardsticks. Equipped with
the necessary and most modern features users for a fair price are to have a
receiver at home, which is to become fair their desires in all interests. In the
time of the High the Gigablue with qualitatively high-quality picture resolution
in the hp format stings definition of television in the eye. The fast switching
time thereby is a further characteristic. Smooth photographs on an external non
removable disk make a archiving possible of desired series or features
problem-free
Characteristics in the overview
- HDTV Receiver MHEG-2 H 264
- 333 MHz BCM MIPS Prozessor Linux OS
- Dolby Digital
- 1x DVB-S2 Sat Tuner integrated
- 1x Hybrid Tuner (DVB-C & DVB-T) Plug & Play (Optional)
- HDMI
- Scart
- Componenten
- USB PVR external HDD (HDD Optional)
- 1xCommoninterface (CI)
- 1xCardreader
- 2 x USB 2.0
- Ethernet 10/100 Mbit
- S/PDIF
- 128 MB Flash / 256 MB RAM
- Timeshift
- unlimited channel memory
- Switching time < 1 Sec
- EPG
- Teletext
- Parentel lock
- Plugin Service
- OSD with more language
- Webinterface, WEB Remotcontrol
- Videoausgänge (HDMI, TV SCART (RGB, CVBS), Component (YPbPr)
- DISEqC 1.0, 1.1, 1.2 und 1.3
Brand new HD receiver sets new standards The Gigablue Quad – execution leaves nothing to be desired.
2 built-in DVB-S2 tuners allow an independent twin use. About two more tuner slots offer the possibility of the receiver to expand any DVB-T or DVB-C2 and combine.
The strong processor offers the viewer a high resolution pictures and a never experienced rapid change-over time.
A further special Characteristic of the GIGABLUE QUAD is the linking of TV and the Internet.
Special features:
- Multi media archive for video and audio over network
- LCD Display ( coloured)
- EPG up to 14 days
- HDMI CEC control
- PiP (Picture in picture)
- Integrated UPnP Server /-clinet function
- Web Browser
- Netzwerk-Interface Streaming-function
- Plugin service (extensions)
- Software update via network
- Settings over Pluginservice
- UFScontrol – Plugin for Iphone and Android Smartphones
- IP TV, IP Radio
- 2 x DVB-S/S2 und 2 x Plug&Play Tuner Modul Socket
Features:
- Integrated HDTV twin tuner for satellite reception
- 2 x Plug & Play Hybrid Tuner Optional
- Record up to 4 HDTV programs and an other HD look show.
- Reception of free and PAY TV channels (2 CI-Schnittstellen and 1 Cardreader)
- HDTV PVR with e-SATA or USB, Multimedia Archive for image, video and music files
- Timeshift ( time shifting)
- Timer-Records (Once, daily, weekly, etc.)
- EPG function, EPG search, picture in picture, EPG, timer, Favorites
- OSD in many languages, DISEqC 1.0, 1.1, 1.2, Unicable, Usuals
- Playback of multimedia files such as MP3, JPEGs and videos in HD quality
- Electronic Program Guide(EPG)
- Connectivity to external devices, such as e.g. a digital camera, external hard drive, and much more. (3xUSB, LAN)
- Optical output for crystal-clear cinema sound
Specifications:
- Processor / Mhz Mipsel / 1300 Mhz
- Linux Kernel Kernel 3.x.x
- DDRSDRAM / Flash DDR3 1024MB / 512MB NAND
- Front Panel
- LCD LCD Display 2inch Color
- Frontkeys 8 Buttons
- CI Slot 2 x CI
- Card Reader 1x Cardreader
- USB 1x USB
- Rear Panel
- Tuner DVB-S/S2 Twin input
- Optional Tuner
- 2 x Plug in Play DVB-C/T(Option)
- HDMI 1 x HDMI
- USB 2 x USB
- S/PDIF 1 x Optical
- 3×2 RCA
- Component, Composite, L, R
- Ethernet 100/100 MBit
- RS-232
- Power Jack And
- Power Switch 1 Switch
- Internal E-SATA
- E-SATA
- Accessories
- Remotcontrol
- Gigablue Remotcontrol
- Remotcontrol + Keyboard (Optional)
- GigaBlue myth RCU Universal Keyboard
- Tuner (Optional)
- Hybrid (DVB-C / DVB-T)
High quality laser cut and black powder coated aluminium fan kit for the
DreamBox 8000. Barely audible at just 0.4 Sone.
Like the DM500HD, the fan
speed is controlled by the software.
Easy to fix with installation kit.
Allows installation of optical drive and 3.5″ HDD.
- Power of the Smart Card via a selectable switch. (3.3V and 5V)
- Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58,
6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
- Phoenix or Smart Mouse mode selectable with a dip-switch.
- FTDI chipset (the drivers are already included in most Linux or Windows
applications included)
- 2 LED indicators for card activity (traffic)
- Power and programming via USB. (there is no need for external power
supply).
- Mini USB cable is supplied.
- Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and
other Linux and Windows applications.
What is Phoenix, Smartmouse?
There are today numerous software’s on the internet that are used to
communicate with different types of smartcards that follows ISO7816(T=0)
standard such as WinExplorer.
Common for these programs are that they need a
Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The
interface (really a very simple construction, it was originally created by
hobbyists who wanted to communicate with smartcards) transform the signal
to/from the serialport of the computer to levels that the smartcard can
handle.
Then an oscillator is provided to the card so it can handle the
commands sent to it.Normally a oscillator at 3.579575MHz are used because the
ISO7816-standard originally uses a speed that is “oscillator” divided with 372
that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is
the polarity on the reset-signal.
WEEE-Reg.-Nr. DE 71415134
Additional wireless Smart-Wi client cards. Three of these
already come shipped with the Smart-Wi Cardsplitter, but if you
want more they can be purchased separately here.
Wireless SmartWi client cards use a small microprocessor to
handle both communication with the receiver and the wireless part.
Features:
- Size 109 x 54 x 0.6 mm
- Conforming to ISO 7816 standard
- Auto-detect clock speed from receiver
- Firmware updateable through the SmartWi master box
- Builtpin PCB antenna for wireless communication with the Master box
- Minimum wireless range of 15 metres from the Master unit (indoor range)
- LED operation indicator
- Powered via receiver’s cam / card reader
- purchased parts package 1 Smart Wi client
card
