Smartmouse Phoenix 3,57/6/8/10/12 MHZ with DIP-switch

Item number: 100375

Smartmouse 3,57/6/8/10/12 MHZ Programmer

Category: Programmers - Card-Reader

19,80 EUR

including19% VAT. , plus shipping

In Stock

Shipping time: 2 - 3 workdays

  • Power of the Smart Card via a selectable switch. (3.3V and 5V)
  • Smart Mouse USB Programmer for the Phoenix / Smart Mouse mode with 3.58, 6.00, 8.00, 10.00 and 12.00MHZ dip-switch.
  • Phoenix or Smart Mouse mode selectable with a dip-switch.
  • FTDI chipset (the drivers are already included in most Linux or Windows applications included)
  • 2 LED indicators for card activity (traffic)
  • Power and programming via USB. (there is no need for external power supply).
  • Mini USB cable is supplied.
  • Suitable as an external card reader for the Dreambox, D-Box, Fritz Box and other Linux and Windows applications.

What is Phoenix, Smartmouse?

There are today numerous software's on the internet that are used to communicate with different types of smartcards that follows ISO7816(T=0) standard such as WinExplorer.
Common for these programs are that they need a Phoenix- or a Smartmouse-interface to communicate with the smartcard.
The interface (really a very simple construction, it was originally created by hobbyists who wanted to communicate with smartcards) transform the signal to/from the serialport of the computer to levels that the smartcard can handle.
Then an oscillator is provided to the card so it can handle the commands sent to it.Normally a oscillator at 3.579575MHz are used because the ISO7816-standard originally uses a speed that is "oscillator" divided with 372 that gives approx. 9600 bps.
The difference between Phoenix and Smartmouse is the polarity on the reset-signal.

WEEE-Reg.-Nr. DE 71415134

Please login first to add a tag.